MX-M700U/N Operation-Manual Setup-Guide GB

18
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
5
Read the message in the "Welcome"
window and then click the [Next]
button.
6
Click the [Printer Driver] button.
• To install the PC-Fax driver, click the [PC-Fax Driver]
button.
• Before installing the software, be sure to click the
[Display Readme] button and view the detailed
information on the software.
* The above screen appears when the printer
driver is being installed.
7
Click the [Next] button.
8
Click the [Custom installation] button.
9
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
10
When the port selection window
appears, select the port that the PCL6
printer driver is using (USB001, etc.)
and click the [Next] button.
11
When the printer driver selection
window appears, remove the [PCL6]
checkmark and click the [PCL5e], [PS]
or [PPD] checkbox so that a checkmark
( ) appears, and then click the [Next]
button.
• When the PC-Fax driver is being installed, this
screen does not appear. Go to the next step.
• The PS3 expansion kit is required to use the PS
printer driver or PPD driver.
• The [PPD] checkbox only appears if you are using
Windows 2000/XP/Server 2003.
!mx7000_us_ins.book 18 ページ ２００６年１０月１８日 水曜日 午前１０時３３分