MX-M700U/N Operation-Manual Setup-Guide GB

23
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
USING THE STANDARD WINDOWS PS PRINTER
DRIVER (Windows 98/Me/NT 4.0)
If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT 4.0 PS printer
driver, follow the steps below to install the PPD driver using the Add Printer Wizard.
1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 1" on the
front of the CD-ROM.
2
Click the [Start] button, select
[Settings] and then click [Printers].
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of the PPD file,
enter the path as follows.
Substitute the letter of your CD-ROM drive for "R" in the
following paths.
After installation, see "CONFIGURING THE PRINTER
DRIVER FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 24) to configure the printer driver
settings.
* "EnglishA" in North America. "English" in Europe.
X Installing the resident font information (Windows 98/Me)
If you have installed the PPD driver on Windows 98/Me and will be using the resident fonts in the machine, you must
install the resident font information. Follow the procedure below to install the resident font information.
1
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows "Disc 1" on the
front of the CD-ROM.
2
Double-click [My Computer] ( ) and
then double-click the [CD-ROM] icon
().
3
Double-click the [Drivers] folder, the
[Printer] folder, the [EnglishA] folder
(the [English] folder in areas other than
the U.S.), the [PPD] folder, and the
[9XME] folder. Double click
"PFMSetup.exe".
4
Follow the on-screen instructions.
After the resident font information has been installed,
restart your computer.
• If you are using Windows 2000/XP/Server 2003, you can install the PPD driver from the installer.
• Be sure to view the Readme file (Readme.txt) before installing the PPD driver. If you are using Windows 98/Me, the
Readme file is in the [EnglishA]* folder of the "Software CD-ROM". If you are using Windows NT 4.0, the Readme file will
be in the [EnglishA]* folder inside the folder that contains the extracted files after you get the software. For the location of
the folder, see step 4. (Contact your dealer or nearest authorized service representative if you want software for Windows
NT 4.0.)
Operating system PPD file path
Windows 98/Me R:\Drivers\Printer
\EnglishA*\PPD\9XME
Windows NT 4.0 (Folder containing extracted
files) \EnglishA*\PPD\NT40
• Before installing the resident font information, be sure to install the PPD driver.
• In the event that a resident font cannot be selected in a software application, install the resident font information again.
02_Setup.fm 23 ページ ２００６年１２月１４日 木曜日 午後１２時５１分