Manualshelf

Instruction manual

ManualsBrandsSharp ManualsHome building and DecorMZ-1F11
12345678910
HOW
TO
CLEAN
THE
DISK
HEAD
You must clean the disk head regularly - determine the interval of cleaning
based on the degree
of
oxide buildup on
the
head. Using a dirty head
will
cause
disk errors and much frustration.
1)
Open the disk holder by pressing the EJECT button.
2) Notice the head
at
the back
of
the disk table.
3)
Wipe
the
head surface with an applicator moistened with head-cleaning liquid.
(Perform this procedure
in
the
similar way
as
cleaning a tape recorder head.)
/ Disk
holder
Disk table (Disk shaft)
Note:
1.
Use
only the specified applicator
to
clean the head.
2.
Purchase head cleaning liquid and applicators
at
an electrical store. (Use a
new
applicator for each cleaning - use several if
the
first one becomes dirty.)
3. Cotton swabs
available
at
any drugstore may be used
as
applicators.
- 6 -