Specifications
ESC+(]3H)+
(HEX1) + .....
-+
(HEXn)+<OOH)
ESC+(]8H)+
<HEX1
)+(HEX, )
+<Data string)
. ,
ESC+(]4H)
ESC+06H)
ESC+(]
9H>+
(HEX)
• Sets
horizontal tabulation.
• n value shall be 135
at
maximum.
• n values may
be
transferred
in
no
particular order.
• Tabulation setting shall be completed with the NULL code.
• The number
of
image data following (]B)+(] 8H) shall be transferred in 2
bytes: (HEX1)+(HEX,).
•
The number
of
transferred bytes shall be expressed in 2-byte hexadecimal
number.
(HEXl) shall represent lower 8-bit data whereas (HEX2) upper
8-bit data. (Ex.) When the number
of
transferred bytes
is
16
bytes .
(I
BH)+<18H)+(l0H)+(Q0H)+(\ 6
byte
data)
• Clears vertical tabulation setting.
• Clears horizontal tabulation setting.
• Sets the maximum number
of
characters printed on one line.
• Specifies the number
of
characters with (HEX) fonowing ESC+(] 9H).
• In the 160-character mode, 0 < HEX
~
160
•
In the I 36-character mode, 0 < HEX
~
136
(Note I)
When
one page contains 66 lines, the tabulation value shall be up to 65.
(Note 2) Character codes shall be
20H
~
7EH. Character codes
of
7FH and larger shall be ignored.
23
•