Specifications

PRINT/P
..
IMAGE/P
COPY/P
'i!I"
PRINT/P CHR$(19)
Cancellation
of
enlarged characters
!"'"r~_m(MZ-80B/80A)
The 136-character mode or 160-character mode is re-
sumed.
PRINT /P CHR$(20) The space between characters is compressed.
Character-ta-character (The
160-character mode will be selected.)
compression
PRINT/P CHR$(21)
Cancellation of
character-ta-character
compression
IMAGE/P "A"
COPY!P I
COPY!P
2
Cancels character-ta-character compression.
(The
I 36-character mode shall be selected.)
ASCII code of character" A", or bit pattern correspond-
ing to 41H,
will be printed in the vertical direction.
LSB -+ • This dot is
0
printed.
0
IMAGE/P "A"
..
0
)41H = 01000001
0
t t
0
MSB LSB
•
MSB ..... 0
IMAGE/P CHR$(65) equals IMAGE/P "A". This print-
int
is called the "Bit Image Mode".
(Note 1) Bit image data are given as string data.
(Note 2) The length
of bit image data shall be 960/line.
If the data exceeds 960, the remainder will be
printed after line feed.
(Note 3) BASIC for MZ-80A does not have this [MA GEl
Pcommand.
COpy /P command is used for output of pattern in-
dicated on the computer CRT screen (or more strictly,
data in V-RAM region)
to the printer as it is displayed
on one screen.
The following four copy formats are available.
However,
BASIC language for MZ-80A does not have
COPY/P2, COPY/PJ, or COPY/P4 commands.
If the CRT screen displays data in V-RAM region for
characters, the data
on one screen win be output to the
printer.
Outputs one-screen data accommodated in graphic
region
lout of 2-screen V-RAM regions for graphic use
(graphic region 1 and graphic region
2) to the printer,
and carries
out bit image pattern printing.
25