User Manual

2-10
2
Writing Data to CD-R/RW Disk
You can use CD-R or CD-RW discs to write data on. CD-RW is an erasable disc onto
which you can write data and from which you can erase data. CD-R is non-erasable
disc onto which you can write data only once. If free space remains, you can add data
until the disc is full.
To write data, run the application called Drag’n Drop CD+ DVD installed on your
computer. See the online help of Drag’n Drop CD+ DVD for the details. To run the
application, click start – All Programs - Drag’n Drop CD+ DVD - Drag’n Drop CD+
DVD.
• Before writing to CD-R/RW, follow the instructions below:
• Connect the AC adapter. If the battery is discharged, writing
process will stop and fail.
• Disable the power management. See Power Management of
Chapter 3.
• Close all of the unnecessary or the automatic start-up applications.
• Disable the screen saver. (Refer to Changing Wallpaper and Setting
Screen Saver section later in this chapter.)
• You cannot add data onto music CDs even if they are not full.