User Manual


4-5 
4
Formatting Floppy Disk
1. Make sure the floppy disk is not write-protected, and insert it into the floppy disk
drive.
2. Click start – My Computer.
3. Right-click 3 ½ Floppy (A:) icon; then, click Format… from the pop-up menu.
4. Select the appropriate formatting options.
5. Click Start to start formatting.
• When you format a floppy disk, all data previously stored on the disk is
lost.
• You cannot format a double-density (2DD) 720KB floppy.
Removing External Floppy Disk Drive Unit
To remove the unit, you need to perform the following steps before you remove it:
1. Click Safely Remove Hardware icon (
) on the taskbar. If you cannot find the
icon, click
to show all kinds of icons.
2. Click on Safely Remove Mitsumi USB Floppy – Drive (A:) string. Safe To
Remove Hardware dialog appears.
3. Remove the unit from your computer.
External Display
You can use an external monitor with your computer. To display the same images on
both displays simultaneously, use the 1024x768 resolution.
• Some monitors, which are not compatible with your computer, may not
display properly.
• In this section, you often see the expression “Display Properties dialog
box.” To open the dialog box, right-click somewhere on the Windows
desktop and select Properties from the pop-up menu.
• To display the image on an external monitor, you may need to install
its driver. Before using the external monitor, refer to the manual
included with it.