User Manual


5-5
5
4. Connect the core end of the LAN cable to the LAN jack and the other end of the
LAN cable to the network hub.
Do not insert into the modem jack (with mark). It will damage the LAN
cable and the modem jack.
You can also directly communicate with another computer using a cross
LAN cable.
5. Turn on your computer.
Configuring LAN Unit
1. Click start – Control Panel.
2. Click Network and Internet Connections; then, Network Connections. If
Classic view is selected, double-click Network Connections icon.
3. Right-click Local Area Connection.
4. From the pop-up menu, select Properties.
5. In the Local Area Connection Properties dialog box, set the network setting
according to the instruction of your network administrator.
• Attach the provided core to your LAN cable to insure compliance with
requirements of EMC regulations for computing equipment.
• Make sure to log on your computer as a member of your Computer
administrators group. Otherwise, you cannot set or change some
settings for the LAN unit.
LAN Jack
Core
LAN Cable (Straight Cable)
To Network
Hub