User Manual

ManualsBrandsSharp ManualsCell PhonesTri-Band Mobile Cellular Phone

3-12

Quick Setup

Quick Setup gives you the basic information you need to

start using your handset by simply following the steps.

Step 1:

Unpacking

Check that you have the following items;

The handset

Rechargeable Li-ion battery

AC charger

Hands free EARphone & MIC

Operation Manual

Some other brochures or supplements may also be

contained.

Step 2:

Inserting the SIM Card and the

Battery

In order to access the services available, do not forget to

insert a SIM card and a battery. The SIM card carries the

user’s identity for accessing the network and also stores

personal information such as the handset directory and

received Text messages, etc. Only use a 3V SIM card

with your handset.

1 Press ( ) and flip the cover in the direction of

the arrow ( ).

2 Remove the battery cover.

3-13

Quick Setup

3 flip the SIM card into the SIM holder as

illustrated.

Do not touch the metal part of the SIM terminal.

4 Position the battery with the printed side up.

Insert its top end as illustrated into slot and

insert the other end into position .

5 Align the battery cover with the battery

compartment as illustrated and flip it in the

direction of the arrow until it clicks.

Removing the SIM Card

In step 3, press the back of the card, flip it in the opposite

direction and remove it from the SIM holder.

Summary of content (3 pages)

PAGE 1
Quick Setup Quick Setup gives you the basic information you need to start using your handset by simply following the steps. 3 1 Press ( ) and flip the cover in the direction of the arrow ( ). flip the SIM card into the SIM holder as illustrated. Do not touch the metal part of the SIM terminal. 4 2 Unpacking Check that you have the following items; The handset Rechargeable Li-ion battery AC charger Hands free EARphone & MIC Operation Manual Some other brochures or supplements may also be contained.
PAGE 2
Step 3: Charging the Battery Using the Charger 1 2 Insert the charger plug into an AC outlet. Open the external connector cap and insert the charger (label facing up) into the USB/ Charger connector. The Indicator LED lights red. When charging is complete, the Indicator LED turns off. In standby mode, the Indicator LED blinks. The standard charging time is approximately 2 hours. Charging time may vary depending on the state of the battery and other conditions.
PAGE 3
Press a, b, c or d to highlight “Settings” and press B. If You Upgrade Your Handset 4 Press a or b to highlight “Date & Time” and press B. 5 Press a or b to highlight “Set date/time” and press B. If you have a mobile phone before purchasing this handset, you may use your previous SIM card with the new handset. In this case, you should keep in mind two things for the setup. 6 Enter the day, month, year and time using the digit keys and press B. If you enter the time in the 12-hour format, press P.