User Manual

6-27
Basic Handset Operations
Basic Handset Operations
This section describes basic phone call functions.
Confirm that the handset is on.
Making a Call
1 Flip open the handset and enter a phone number
with the keypad.
When entering a number, start with the area code.
2 Confirm the number and press D.
Start talking when the connection is established.
If you enter a wrong number
Press A [Clear] to delete one digit. Press A [Clear] and
hold for approximately 2 seconds to delete all digits and
return to standby mode.
Ending a Call
Press F to end the call.
The estimated total time for the call appears.
Answering a Call
1 The handset rings and the Indicator LED flashes
for an incoming call.
2 Press D, B or C [Answer].
The call is connected and “ ” appears.
When the Any Key Answer Function
is Activated
To answer a call, press any key except F or A. For
information on “Any Key Answer,” refer to “Setting Any
Key Answer” on page 15-126.
When the hands free EARphone &
MIC is connected
To answer a call, press and hold the button of the hands
free EARphone & MIC for approximately 2 seconds.
Flipping close the handset also ends a call.
6-28
Basic Handset Operations
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
1 Press F while the handset is ringing.
Redialling
The handset keeps a record of the phone numbers of the
10 most recent calls dialled, missed, or received. You can
retrieve these phone numbers to make calls.
1 Press D while the handset is in standby mode.
2 Press c or d to highlight a category between
“Dialled numbers,” “Received calls,” and “New
calls.”
3 Press a or b to highlight the number you wish
to call.
4 Press D to redial the call.
Setting Automatic Redialling
This function makes the handset redial automatically
when the first redial attempt is unsuccessful. For
information on “Auto redial,” refer to “Activating Auto
Redial” on page 15-130.
When the Hands free EARphone & MIC is
connected to the handset and the “Any Key
Answer” function is set to “On” you can, answer
calls by pressing the
V or W key.
When the handset is connected to Hands free
car kit, and “Automatic answer” is set to “On”, the
handset automatically connects the call after the
specified time and you can talk to the caller. For
information on “Automatic answer”, refer to
“Setting the Automatic Answer” on page 15-127.
If your subscription includes the Calling Line
Identification (CLI) service, the caller’s number
appears on the screen. If the caller’s name and
number are stored in the “Contacts list,” the caller’s
name and phone number appear on the screen.
If the number is a restricted number, “withheld”
appears.
When receiving a call from a person whose picture
is registered in the “Contacts list,” the receiving
display and the picture appear alternately. For
more information on the “Contacts list” refer to
“Using the Contacts List” on page 9-48.
You can also reject an incoming call by flipping
closed the handset.