User Manual

15-156
Setting the Handset
To check call barring status
5 After step 4 of “Barring Calls” (page 15-155),
press a or b to highlight “Status” and press B.
6 When you finish, press A [Back].
To cancel all call barring settings
3 After step 2 of “Barring Calls” (page 15-155),
press a or b to highlight “Cancel all” and press
B.
4 Enter the network password and press B.
All call barring settings are cancelled.
Setting Fixed Dialling No.
This setting enables the “Fixed dialling No.” function. If
you turn the security function on, you can only call
predefined numbers. In this step you are asked to enter
your PIN2 code for this setting. You should check the
number beforehand.
1 At the main menu, select in the following order:
“Settings” → “Security.”
2 Press a or b to highlight “Fixed dialling No.”
and press B.
3 Enter PIN2 code and press B.
4 Press a or b to highlight “Settings” and press
B.
5 Press a or b to highlight “On” and press B.
To disable the fixed dialling No.
In step 5, press a or b to highlight “Off” and press B.
The “Fixed dialling No.” function may not be
available depending on the SIM card.
e_tm200_7fm.book Page 156 Tuesday, November 9, 2004 9:14 PM