Installation Manual

3 0
6
INSTALLATION WORK
12. Place the tile slider over the standoff and secure with
two 135 mm screws (XA50).
1
Align the end with
the hole guide line
Front row,
holes 1 & 3
Middle row,
holes 2 & 4
Top row,
holes 3 & 5
Drill guides.
Never use drill
guide holes
for tile roof
standoff screw
The arrow points
towards the eave.
Tile roof slider
(AE110)
Tile roof stand off screw
(XA50)
13. Push the top butyl pad into the silicone dome. Make
sure that the silicone caulk forms a bead around the
butyl pad.
Support AL plate
(AK111)
Bottom butyl pad
(AE105)
Top butyl pad
(AE106)
Tile roof stand off
(AE104)
Notice: Butyl pads should be pushed down after
sliders are secured to stand off with two 135 mm
screws (XA50).
SiliconeSilicone
CORRECT WRONG
14. Insert the roof tile slider bracket into the slider and
prepare for rail installation.
Tile roof slider bracket
(AE102)
Repeat this process for all of the tile standoffs.