Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Affixing the Stand Hole Protection Covers
- Preparing the Remote Control Unit
- Removing the Handles (PN-80SC5/PN-70SC5 only)
- Mounting a web camera
- Turning Power On/Off
- Touch action
- Basic Operation
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
14
E
Connecting the Power Cord
Caution
• Use only the power cord supplied with the monitor.
• When all connections are complete, connect the power
cord.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
TIPS
•
Be sure to clamp the power cord (supplied) onto the cable clamp attachment using the supplied cable clamp (for power cord).
When clamping the power cord, take care not to stress the terminal of the power cord. Do not bend the power cord excessively.
For information on how to attach the cable clamp, see page 15.
Power cord (Supplied)
Cable clamp (for power cord)
Main power switch
Power cord (Supplied)
2
1
AC input terminal
For power
outlet
3