DIGITAL MULTIMEDIA PROJECTOR OPERATION MANUAL MODEL PG-M25X
Easy to Use Functions
-97
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
Select “Break Timer” from the “Options
(2)” menu on the menu screen.
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1 When
“ ”
is displayed, press
or to set the
Break Timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
To cancel the break
time
1 Press Undo on the remove
control or press R on the
remote control.
Note
• When using the GyroRemote, set the
Break time using the GyroRemote (see
page 41).
• Auto Power Off will be temporarily dis-
abled during the Break Timer.
If no signal transmission occurs for more
than 15 minutes after the Break Timer has
completed, the projector will turn off.
• The Break Timer will be displayed on the
startup image. To change the screen dis-
played during the Break Timer, change the
setting of “Startup Image” (see page 95).
PG-M25X#E#p97_106.p65 02.4.29, 3:24 PM97