DIGITAL MULTIMEDIA PROJECTOR OPERATION MANUAL MODEL PG-M25X
Easy to Use Functions
-69
Network Settings
Note
• This section explains items that can be set in a network. A wireless connection will not be possible if these
items are not set correctly.
• Also, as there are values that must be entered in a pre-configured network, make sure to consult with your
network administrator.
Setting Up a Projector Name
This Network setting assigns a name to the pro-
jector. The default setting is “MY PROJECTOR”.
When selecting “Projector” in the net-
work menu on the menu screen
➝
For operating the menu screen, see
pages 50 and 52.
➝
For operating the menu screen using
the GyroRemote see pages 54 and 55.
1
Press or to select
“Projector” and then press
.
2 Press in “Name”.
3 Press or to select
the characters you want to set.
Note
• The following characters can be entered:
Letters (A-Z), numbers (0 – 9) or symbols
(–, _, ( )).
• Pressing
or switches
between procedures as shown below.
• If you want to delete one charactor to the
left, select “BS” by pressing or
and press .
• The projector name is displayed when the
projector has been found via the computer.
4 Press .
Note
• If you want to correct a letter or symbol,
press or to move the cursor to the
character you want to correct, and then use
or to correct the character.
• Characters can also be selected using
on the GyroRemote.
•
If you want to cancel the settings, press .
PG-M25X#E#p65_77.p65 02.4.29, 3:18 PM69