DIGITAL MULTIMEDIA PROJECTOR OPERATION MANUAL MODEL PG-M25X
-84
This function allows you to enlarge a specific portion of an image. This is useful when you
want to display a detailed portion of the image.
UNDO
button
Function 2
button
ASSIGN
button
Function 1
button
-84
"On-screen Display
Screen moving
indicator
Displaying an Enlarged
Portion of an Image
For using the GyroRemote, see page 40
for details.
1 Press to display “Button
Assign 3/5”.
• The Assign function is displayed at the
bottom right of the screen.
2 Press Function Button to
enlarge the image.
• To reduce the size of the enlarged
image, press Function Button
.
Note
×1 ×4 ×9 ×16 ×36 ×64×2 ×3
To enlarge
To reduce
• When an SXGA
+
or UXGA image is
displayed, “×2” and “×3” cannot be
selected.
3 Hold down and move the
GyroRemote to move the
enlarged image.
• If the Screen moving mark has
disappeared, press Function Button
to display the Screen move mark,
and then move the image.
Note
• You can also move the position of the
enlarged image using
or
or on the projector.
Selecting the Picture Display Mode (cont.)
PG-M25X#E#p78_96.p65 02.4.29, 3:21 PM84