specifications

SHARP&ELECTRONICS&CORPORATION
5901&Bolsa&Avenue,&Huntington&Beach,&CA&92647
!"#$$"%&'()"$*+,+-./012+34/56371/583 4/5693/:;7.
<<<:34/5693/:;7.=371/5
$#'"$>>+,+?@"!!"$#
A+B$$#+%4/ 56+-1C;D57E0;3+@75675/D07E:+(11+50F4D3+5C3C5G CH:
175 WATT
NT-175UC1
NEC 2008 Compliant
Module output cables now 12 AWG with locking connectors
Design and specifi cations are subject to change without notice.
Sharp is a registered trademark of Sharp Corporation. All other trademarks are property
of their respective owners. Contact Sharp to obtain the latest product manuals before using
any Sharp device. Cover photo: Solar installation by Paci c Power Management, Auburn CA.
ELECTRICAL CHARACTERISTICS
Maximum Power (Pmax)* 175 W
Tolerance of Pmax +10%/-5%
Type of Cell Monocrystalline silicon
Cell Confi guration 72 in series
Open Circuit Voltage (Voc) 44.4 V
Maximum Power Voltage (Vpm) 35.4 V
Short Circuit Current (Isc) 5.40 A
Maximum Power Current (Ipm) 4.95 A
Module E ciency (%) 13.45%
Maximum System (DC) Voltage 600 V
Series Fuse Rating 10 A
NOCT 47.5°C
Temperature Coe cient (Pmax) -0.485%/°C
Temperature Coe cient (Voc) -0.36%/°C
Temperature Coe cient (lsc) 0.053%/°C
*Measured at (STC) Standard Test Conditions: 25°C, 1 kW/m
2
insolation, AM 1.5
MECHANICAL CHARACTERISTICS
Dimensions (A x B x C below) 32.5” x 62.0” x 1.8”/826 x 1575 x 46 mm
Cable Length (G) 43.3”/1100 mm
Output Interconnect Cable**
12 AWG with MC4 Locking Connector
Weight 35.3 lbs / 16.0 kg
Max Load 50 psf (2400 Pascals)
** A safety lock clip (Multi Contact part number PV-SSH4) may be required in
readily accessible locations per NEC 2008 690.33 (C)
WARRANTY
25-year limited warranty on power output
Contact Sharp for complete warranty information
Power [W]
Current [A]
Current vs. Voltage
IV CURVES
QUALIFICATIONS
UL Listed UL 1703
Fire Rating Class C
Contact Sharp for tolerance specifi cations
DIMENSIONS
Power [W]
Current [A]
Current vs. Voltage
B AC K V I E W
SIDE VIEW
A B C D E
32.5”/826 mm 62.0”/1575 mm 1.8”/46 mm 13.4”/340 mm 3.9”/100 mm
F G
31.1”/790 mm 43.3”/1100 mm
A
D
D
B
E
E
G
F
C