Data Sheet

SHARP ELECTRONICS CORPORATION
5901 Bolsa Avenue, Huntington Beach, CA 92647
1-800-SOLAR-06 • Email: sharpsolar@sharpusa.com
www.sharpusa.com/solar
10L-080 • PC-11-10
© 2010 Sharp Electronics Corporation. All rights reserved.
235 WATT
NU-U235F4
NEC 2008 Compliant
Module output cables: 12 AWG PV Wire
Design and specifi cations are subject to change without notice.
Sharp is a registered trademark of Sharp Corporation. All other trademarks are property of
their respective owners. Contact Sharp to obtain the latest product manuals before using
any Sharp device.
ElEcTricAl cHArAcTEriSTicS
Maximum Power (Pmax)* 235 W
Tolerance of Pmax +10%/-5%
Type of Cell Monocrystalline silicon
Cell Confi guration 60 in series
Open Circuit Voltage (Voc) 37.0 V
Maximum Power Voltage (Vpm) 30.1 V
Short Circuit Current (Isc) 8.50 A
Maximum Power Current (Ipm) 7.81 A
Module E ciency (%) 14.4%
Maximum System (DC) Voltage 600 V
Series Fuse Rating 15 A
NOCT 47.5°C
Temperature Coe cient (Pmax) -0.485%/°C
Temperature Coe cient (Voc) -0.351%/°C
Temperature Coe cient (lsc) 0.053%/°C
* Illumination of 1 kW/m
2
(1 sun) at spectral distribution of AM 1.5 (ASTM E892
global spectral irradiance) at a cell temperature of 25°C.
mEcHAnicAl cHArAcTEriSTicS
Dimensions (A x B x C below) 39.1” x 64.6” x 1.8”/994 x 1640 x 46 mm
Cable Length (G) 43.3”/1100 mm
Output Interconnect Cable**
12 AWG with MC4 Locking Connector
Weight 41.9 lbs / 19.0 kg
Max Load 50 psf (2400 Pascals)
Operating Temperature
(cell) -40 to 194°F / -40 to 90°C
** A safety lock clip (Multi Contact part number PV-SSH4) may be required in
readily accessible locations per NEC 2008 690.33 (C)
**PV Wire per UL Subject 4703
wArrAnTY
25-year limited warranty on power output
Contact Sharp for complete warranty information
QUAlificATionS
UL Listed UL 1703
Fire Rating Class C
Contact Sharp for tolerance specifi cations
DimEnSionS
A B C D E
39.1”/994 mm 64.6”/1640 mm 1.8”/46 mm 14.4”/365 mm 3.9”/100 mm
F G
37.7”/958 mm 43.3”/1100 mm
BACK VIEW
SIDE VIEW
A
D
D
B
E
E
G
F
C
“BUY AmEricAn
Sharp solar modules are manufactured in the United
States and Japan, and qualify as “American” goods
under the “Buy American” clause of the American
Recovery and Reinvestment Act (ARRA).