Setup Manual

Connections

Caution

• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting

cables. Also, read the manual of the equipment to be connected.

• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables

connected to the input and output terminals may cause malfunctions and the other problems.

For power outlet

When the PN-ZB01

(optional) is attached

TIPS

• Set the audio input terminal used for each input mode in AUDIO SELECT on the OPTION menu. The factory settings are

shown below.

Input mode Audio input terminal (Factory setting)

PC D-SUB, PC DVI-D, PC RGB Audio input terminal

AV DVI-D Audio1 input terminal

AV COMPONENT (BNC),

AV S-VIDEO , AV VIDEO (BNC)

Audio2 input terminal

AV COMPONENT (D-SUB),

VIDEO

(D-SUB)

Audio input terminal

PC HDMI, AV HDMI PC/AV HDMI input terminal

• When connecting the external speaker, attach the speaker cable core (included in the optional PN-ZB01).

• HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC.

1. AC input terminal

2. Power cord (Supplied)

3. PC/AV HDMI input terminal

4. PC D-sub input terminal

5. Audio input terminal

6. Audio output terminals

7. RS-232C output terminal

8. RS-232C input terminal

When the PN-ZB01 (optional) is attached

9. PC/AV DVI-D input terminal

10. PC/AV DVI-D output terminal

11. LAN terminal

12. External speaker terminals

13. Audio 1 input terminals

14. Audio 2 input terminals

15. PC RGB input terminals

16. AV component input terminals

17. AV video input terminal

18. AV S-video input terminal