Specifications

1-8 Turning on the Power
1
Turning on the Power
You can find the power switch near the center of the left side of the notebook. Press
the switch firmly to turn it on.
The power switch does not operate with only a light touch.
After a few seconds, the notebook begins to execute the Power-On-Self-Test (or
POST) which is automatically run whenever the notebook is turned on. It checks the
memory, keyboard, system board and other components of your notebook before the
notebook begins normal operation.
The notebook may alert you with a message that the configuration is
invalid. Press the F2 key to enter the Setup Utility. To load the default
configuration, press the F9 key. Then press the Esc key, select “Save
Change & Exit,” and press the Enter key twice.