Specifications

4-16 Port Replicator
4
Port Replicator
If you need additional ports for the notebook, you can attach the CE-A40PR Port
Replicator to the expansion bus connector on the back while the notebook is turned
off. This allows you to quickly detach or re-attach your system from or to your office
or work desk apparatus.
To install the port replilcator
1. Turn off the notebook.
2. Push down to open the cover of the expansion bus connector on the rear side of
the notebook.
Figure 4-11. Opening the cover of the expansion bus connector
3. Connect the port replicator to your notebook. Refer to the manual provided
with the port replicator.
•
If your country applies PAL (Phase Alternate Line) as the broadcast
and video standard you cannot use vido output jack on your port
replicator.
•
When using PC card slots of the port replicator, use the PC card
driver preinstalled in your notebook. Do not use the driver in the
supplemental disk attached to the port replicator.