System information
1 Instrument
www.turnerbiosystems.com 7
• Visible when a USB flash drive is detected
• Icon turns dark when files have been saved to the USB flash drive
1.2.2 Buttons on the READ Screen
• DETECTION MODE button
• Touch the button to toggle between luminescence,
fluorescence, and absorbance capabilities
• PROTOCOL button
• Touch the white text button to see the list of preset and
user-defined protocols
• PLATE MAPPING button and well selection indicator
• Touch the button to specify which wells to be read
• Green wells are selected for reading
• Gray wells are deselected and will not be read
• In Luminescence mode, this button enables KINETIC
• In Absorbance mode, the WAVELENGTH button enables single or dual
wavelengths
• Starts a run
• Activates the PMT before starting a luminescence run
• PMT activation is required before the first luminescence run of the day
• The SETUP button appears when injectors are connected
• Prepares the injector(s) for a prime, a flush, and a reverse purge
• Touch one of the INJECTOR buttons to activate an injector(s)
• Green indicates the injector is selected
• Gray indicates the injector is deselected
• Button for keypad entry
• Used in the USER PROTOCOL screen to enter a protocol name
• DELETE FILES button
• DELETE PROTOCOL button
1.2.3 Buttons on the RESULTS Screen
• Displays a list of the 50 most recent results files
• Use the UP and DOWN buttons to scroll through the 50 most recent results
• Use the RIGHT and LEFT arrow buttons to scroll the wells in columns 1-12