System information

www.turnerbiosystems.com 40
6 Accessories
6.1 Curve Fitting Data Analysis Software (9300-970)
Curve Fitting Data Analysis software is easy-to-use analysis software that analyzes data (96
readings of microplate generated from instruments) and calculates the concentration of unknown
samples using eight different curve-fitting methods. The eight different methods available are
linear fit, quadratic fit, cubic fit, two-parameter fit, four-parameter fit with linear x-axis, four-
parameter with log 2-axis fit, linear spline and cubic spline. The software is compatible with
Windows XP.
To download the Curve Fit Data Analysis Software for free, go to the customer care section of the
Turner BioSystems webside at www.turnerbiosystems.com.
6.2 Connecting to a PC using External PC Connectivity Kit (9300-971)
It is possible to control the Modulus Microplate Reader through an external PC
and directly store the results on the hard drive of the PC using the optional
External PC Connectivity Kit (9300-971). It is currently not possible to connect
through a Mac computer. For pricing, contact Turner BioSystems via e-mail at
[e-mail]. If you have purchased this accessory, complete
instructions have been included in the software package kit.
6.2.1 General Information
• Install the necessary software before connecting the PC to the instrument.
• Results files will not be saved on the internal computer of the Modulus™ Microplate
Reader when an external PC is directly connected.
• Data from the instrument’s internal computer can only be transferred through the USB
port located to the left of the touch screen.
Figure 6-1: Graph Tab of the Curve Fitting Data Analysis Software