User guide

Acquisition Interface
3–2 IMAGING SOFTWARE OVERVIEW
Acquisition Interface
Panoramic Acquisition Overview
The Panoramic Acquisition interface is the main panoramic interface with the CS 9300
that provides you with imaging acquisition functions.
Figure 3–1 Panoramic Acquisition interface
1 Information button:
 About: Identifies the Software and the Firmware versions.
 Reset of the Values: Resets to the manufacturing parameter settings.
 Memorize settings: Memorizes the user preference settings for each patient type (kV,
mA and seconds).
 Save current mode as default: Sets the current selected program to be available by
default each time you access the Acquisition interface.
 Activate the Phantom mode: Sets the unit parameters to perform an image quality
control test.
2 Preview Screen: Displays the acquired image in real time.
3 Selected Parameter Display: Displays the current acquisition parameter settings.
4 System Status Screen: Displays various alert or warning messages originating from the unit.