User guide

Acquiring 3D Images
6–6 ACQUIRING 3D IMAGES
Launching the x-ray
To launch the x-ray, follow these steps:
1. Leave the x-ray room and close the door. You must keep visual contact with the
patient during acquisition.
2. Trigger the x-ray with the remote control. Press and hold the exposure button until the
end of the acquisition is indicated by the on-screen “Release Switch” message. The
turns yellow and a warning sound is heard, indicating x-ray emission. The image
appears in the Preview Screen. When the acquisition ends, the 3D Acquisition
interface disappears.
3. Release the patient while waiting for the 3D image reconstruction.
4. Wait for the 3D image reconstruction. Open the 3D Imaging window and access the
acquired 3D image.
IMPORTANT
To stop the acquisition, if any problem, release the exposure
button of the remote control or press the red emergency stop
button.