Specifications

8 8
Boot Sequence Specifies where the boot program looks for operating system files.
When you select A: then C:, for example, the system checks the floppy disk drive
first, and if no system disk is found in the drive, the system boots from the hard disk
drive.
Key Click Turns on/off the sound when you press a key.
Display Mode Specifies on which display the screen appears when the system
starts. The default value is Auto, in which a CRT monitor gets the priority. If the
CRT monitor is not connected to the notebook, the LCD screen works when the
system starts. Whichever mode you have selected here, you can change the display
with the Fn + F5 keys after the system starts.
Large Disk Access Mode Normally has to be as default, DOS. If installing other
operating system such as UNIX, you may have to change the value to Other.
System Memory Defines the size of conventional memory for starting MS-DOS. It
always shows 640 KB.
Extended Memory Defines the size of extended memory found by the BIOS during
the Power-On Self Test (POST). The notebook automatically updates the value
when you enter the Setup Utility after you add an optional memory module.
8-4 Setup Utility