Specifications

8 8
Auto Suspend-to-Disk After Defines the duration before your notebook enters the
Suspend to Disk.
Hot Key Suspend Data to Defines whether the system enters the Suspend to RAM
or Suspend to Disk when you press Fn+F12 or when you close the cover screen. If
you do not set the next item, Cover Close, to Suspend, however, the system does not
enter the suspend mode when you close the screen.
Cover Close Specifies the status when you close the screen cover. If you set it to
Video Off, the back light of the LCD screen is off. If you set it to CRT Display, the
display output is switched to the CRT display when you close the screen cover. If
you set it to Suspend, the system enters the suspend mode.
Battery Low Warning Beep Defines whether to make a warning sound if the
battery power is low.
VGA Activity Defines whether the power management works when the screen
image has not been changed for the specified time. If you set this item to Enabled,
the power management does not work when the screen gets even a small change
such as the clock proceeding. If you set it to Disabled, the power management
works even when the screen image gets changed.
Resume On Time Defines whether the system resumes from the Suspend to RAM
at the time specified in the item below.
Resume Time Defines the time when the system resumes from the Suspend to
RAM.
Resume On Modem Ring Defines whether the system resumes from the Suspend
to RAM when the modem receives a call.
This item may not be effective to some modems.
8-10 Setup Utility