Specifications
Figure T-1. Inserting a Fine Rod
Question: Why do I get a non-system disk or disk error message?
•
You may have inserted a non-bootable disk in Drive A: (either a
defective disk or one without an installed operating system).
Remove the disk.
•
Check the Setup Utility to ensure that the drive types are correctly
identified.
•
If this message is issued when you attempt to boot from your hard
disk drive, insert a bootable disk and check the integrity of your
hard disk drive.
Question: Why is the date and/or time incorrect?
•
Correct the date and time using the Windows Control Panel or the
Setup Utility.
•
If the date and time are still incorrect when you reboot, contact your
dealer to change the CMOS backup battery on the system board.
Question: Why do expansion or peripheral devices not function?
•
Confirm they are correctly connected to your notebook.
T-6 Troubleshooting
Tr
oubleshoot
ing
•
Confirm drivers necessary for operating the devices are installed.
•
There may not be a free IRQ. Refer to the section of System
Mapping in order to release an IRQ for a built-in device.
Question: Why can I not print out?
•
Check whether the printer is powered on.