Specifications

•
Confirm the item of the GlidePoint in the Advanced menu of the
Setup Utility is Enabled.
•
If a PS/2 mouse is connected to the notebook, the GlidePoint does
not work. Remove the PS/2 mouse.
Question: Why can I not communicate through the built-in IR port?
•
Confirm the IR port of your notebook is lined up with the IR port of
the other device. These ports should be no more than 30 inches (80
cm) apart without any obstacles.
•
Confirm the COM2 is set to IR in the Advanced menu of the Setup
Utility.
•
Turn off the power management both in the Windows and the Setup
Utility.
•
Select the IrDA mode in the IR Type.
Question: Why can I not communicate through the built-in modem?
(U.S. and Canada only)
•
Confirm the telephone line is properly connected to the modem
jack.
•
Confirm the COM1 is set to Modem in the Advanced menu of the
Setup Utility.
•
Turn off the power management both in the Windows and the Setup
Utility
Question: Why does the screen saver move extremely slowly?
Troubleshooting T-9
Troubleshooting
•
Your notebook is in the idle mode. You can disable the idle mode
in the Setup Utility, if necessary.
Question: Why does CardBus not function?
•
Install CardWorks stored at R:\PCCARD95 in the Backup CD-
ROM. CardBus may function.