Specifications

2
Choosing Power Source
You can use the notebook with one of the following power sources:
•
AC power from a wall outlet
•
Rechargeable battery pack
Use AC power whenever possible; rely on the battery pack only when AC power is
not available.
About the Power Indicators
The power indicators show the power status of your notebook.
Indicator Green Light Meaning
AC power On Operating with the AC power
Blinking Suspended to RAM (while operating with AC)
Battery power On Operating with the battery power
Blinking Suspended to RAM (while operating with battery)
Battery charge On (green) Fully charged
On (orange) Being charged
Blinking
(red)
Almost completely discharged.
(The warning beep sounds)
For more information on Suspend to RAM, see Chapter 3.
Using the AC Adapter
When connected to a wall outlet, the AC adapter provides power for operation or
charges the battery. The AC input voltage can range from 100 to 250 volts so that
you could use the notebook with the appropriate plug adapter.
The AC power cord included with the notebook is appropriate for the
voltage of your local area. If you attempt to connect the notebook to a
wall outlet other than in your local area, check the voltage of the outlet
and use an AC power cord appropriate for the outlet.
You can also install the AC adapter into the left-side bay. Refer to the section of
Installing Units into Bays in this chapter for the detail.
Basic Operations 2-1