Specifications

3
•
You open the screen cover and press any key if the system enters the suspend
mode by closing the cover (as long as the battery voltage is sufficient), or
•
The modem receives a call (in US and Canada only).
If you do not want to resume your system by calling:
1. Restart the notebook.
2. When the message Press <F2> to enter SETUP appears, press F2.
3. Press the right arrow key to select Power menu.
4. Set the item of Resume On Modem Ring to Disabled.
5. Press Esc; then, Enter twice.
6. From the Start menu, select Settings - Control Panel.
7. Double-click Power.
8. In the Power Properties dialog box, click Advanced.
9. Uncheck the item of Wake up the computer when the phone rings.
10. Click OK twice.
When resuming from the suspend mode, the system restores the exact state as it was
when entering the suspend mode.
• If sufficient battery power does not remain, your notebook will not
resume from a suspend mode. To resume it from a suspend mode,
connect the notebook to the wall outlet.
• The RAM contents are preserved using the AC power supply or the
battery. If all power sources are disconnected while the system is in
the Suspend to RAM, the RAM contents will be lost.
When entering or resuming from a suspended mode, be sure to observe
the following precautions. Otherwise, the notebook may not operate
correctly after the notebook has resumed from the suspend mode.
• Do not operate the keyboard, GlidePoint or mouse in the process of
entering or resuming from the suspended mode.
• Before the system enters a suspended mode, terminate any
communications and make sure that no video or audio playback or
recording is in progress.
• Make sure the Windows power management is on (see page 3-10).
3-6 Battery and Power Management