Specifications

3
Hot-Key Suspend Data to Switches whether the system enters the Suspend to
RAM or Suspend to Disk when you press Fn + F12.
Cover Close Specifies the status when the cover is closed.
Since Windows 95 periodically accesses the hard disk and automatically
writes to the display, the Auto Suspend functions above sometimes do not
work.
Battery Low Warning Beep Defines whether the system makes a beep when the
battery power becomes low.
VGA Activity Specifies whether the displayed screen influences the power
management. If you select Enabled, the power management does NOT work
because it means the changed screen influences the power management. If you
select Disabled, the power management works even if the screen is slightly changed
such as updating of the clock.
Resume on Time Defines whether the system resumes from the Suspend to RAM at
the time defined in Resume Time.
Resume Time Specifies the time when the system resumes from the Suspend to
RAM. The fields in this item correspond to hours, minutes and seconds,
respectively.
Resume On Modem Ring Specifies whether the system resumes from the Suspend
to RAM when the system is called up while suspended to RAM.
If your notebook does not have a modem, leave this item as Disabled.
To change the power management settings:
1. Turn on or restart your notebook.
2. When Press <F2> to enter SETUP appears, press F2.
3. Press the right arrow key to select Power menu.
4. Set each item.
5. Press Esc; then, Enter twice.
Battery and Power Management 3-9