Specifications

<Ver. 2.1>

In this case, use both the hexagonal socket-head button bolt (M8 x 18) and the washer supplied with the

PDA-4001 or PDA-4002. If the PDK-4005 is tightened using the hexagonal socket-head button bolt (M8 x

14) supplied with the PDK-4005, the screw is too short to provide sufficient strength. To ensure safe

operation, use the M8 x 18 bolt.

Hexagonal socket head

button bolt (M8 x M18)

(supplied with the PDA-

4001 and 4002)

Mounting standard metal fixtures (PDA-4001 • PDA-4002)

4.10.5 Mounting the PDP bracket (PDK-4005) with PDA-4001 and PDA-4002 mounted

To attach the PDP bracket (PDK-4005) with the PDA-4001 and PDA-4002 mounted, tighten along with the filter-supporting

metal fixture, as shown below.

Caution

4.10.4 White balance

When the infrared reduction filter (PDA-4001) is mounted on the display, the tone may change. In this case, we

recommend that you adjust the white balance.

Hexagonal socket head

button bolt (M8 x M18)

(supplied with the PDA-

4001 and 4002)

Hexagonal socket head

button bolt (M8 x M18)

(supplied with the PDA-

4001 and 4002)

Hexagonal socket head

button bolt (M8 x M18)

(supplied with the PDA-

4001 and 4002)

M8 wave washers

(supplied with the

PDK-4005)