Specifications

4-10
4
Printer
You can connect a printer to a parallel port of the external floppy disk drive unit.
Before using a printer, read the printer manual.
Setting the Setup Utility
In the
Advanced
menu of the Setup Utility, set the
LPT Port:
to
Auto
or
Enabled
.
Also set the
Mode:
, referring to your printer manual.
Installing a Printer Driver
To use a printer, you need to install a printer driver.
1. From the
Start
menu, select
Settings
-
Printers
.
2. Double-click
Add Printer
. The
Add Printer Wizard
appears.
3. Click
Next
.
4. Confirm
Local printer
is selected and click
Next
.
5. Select the manufacturer and the printer, and click
Next
. If you cannot find the
model name of your printer, you have to install the printer driver included with
your printer. See your printer manual for details.
6. Select
LPT1
and click
Next
.
7. Make sure the printer name is correct, and click
Next
.
8. Decide whether to print a test page, and click
Finish
. Before printing a test
page, make sure the printer is ready.
RS-232C Device
You can use RS-232C devices, such as a modem or a terminal adapter with your
computer. RS-232C port is available on the external floppy disk drive unit. To use
an RS-232C device, set the item
Serial Port
: to
Auto
or
Enabled
in the
Advanced
menu of the Setup Utility. See the manual before using the device.