User manual

Operation
Mobile Computer MC 95xx
ex
-NI
Type B7-A29.-…………
Page 24 of 57
Technical data subject to change without notice.
Issue: Revision 1 / March 2011
Figure 4-5: Lifting the SIM Cover
(9) Insert the SIM card into the holder door with the contacts facing down and the card
notch facing up.
Figure 4-6: Inserting the SIM Card
(10) Close SIM card holder door and slide to the right to lock into place.
(11) Align the SIM card cover over the access hole and press down until it snaps into
place.
(12) Insert the battery.
(13) After completing initial MC 9596
ex
-NI setup or after replacing a SIM card:
− Press the red Power button.
− On the Today screen tap Wireless Manager.
− Ensure Phone is on.
− Press the red Power button to suspend the MC 9596
ex
-NI.
− Perform a warm boot.
− Make a call to verify cellular connection.
Note
For detailed information about WWAN activation and settings, refer the Motorola
MC9500-K Series Mobile Computer Integrator Guide.