User manual

Mobile Computer MC 95xx
ex
-NI
Type B7-A29.-…………
Operation
Technical data subject to change without notice.
Issue: Revision 1 / March 2011
Page 37 of 57
4.8 Screen Protector
Caution!
- The screen protector may only be changed outside the hazardous area!
- It must be ensured that only original screen protector used in safety-oriented
operation.
- Use only BARTEC type B7-A2Z0-0017
- The use of imitation screen protectors from other manufacturers will render the
type of ignition protection ineffective and there will then be a risk of fire or
explosion.
4.8.1 Removing the Screen Protector
The MC 95xx
ex
-NI is provided with a screen protector. BARTEC recommends using this to
minimize wear and tear. Screen protectors enhance the usability and durability of touch
screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit
card, then carefully lift it off the display.
Attention!
Do not use any sharp object to remove the screen protector. This could damage the
display.
Note
Use without the screen protector impairs, amongst other things, the equipment
warranty. You can get a replacement screen protector from your customer consultant
or from BARTEC. Installation instructions for the screen protector are part of the
delivery scope. Part number: B7-A2Z0-0017 screen protector, pack of 5.