Instruction manual

Miscellaneous Parts:
4BF10 400 Series Handle
4BF30 Rear Dust Outlet
4BM32 Return Spring w/Washer
4BM31 Downstop Block 400 Hand Operated
4BM223-6’ 6’ Extended Fence-extrusion 3.5” H
4BM224-10’ 10’ Extended Fence-extrusion 3.5” H
4BM225-12’ 12’ Extended Fence-extrusion 3.5” H
400BM38 Stop for Extended Fence
Arm, Pivot Shaft and Head Parts:
4BC01 400 Series Arm
4BC02 400 Series Pivot Bracket
4BE100 400 Head Assembly, 16”
4BE100-20” 400 Head Assembly, 20”
4BE50 Arm & Pivot Assembly, no spindle
4BM03LX/RX Angle, Motor Mount, Left & Right
4BM04X Rod, Motor Mount Pivot Shaft
4BM05X Cross Bar, Motor Mount Adjustment
4BM07X Chip Deflector Plate
4B6S13 7-1/2 H.P. TEFC Motor
200B2P80 Rotating Rod End Motor Mount
4BM06 Motor Mount Adjustment Rods ( 2 )
Blade Guard and Belt Guard Parts:
4BE13 16” Blade Guard Assembly
4BE13S 16” Blade Guard Assembly w/SLS
4BF12 20” Blade Guard Assembly
4BE12S 20” Blade Guard Assembly w/SLS
4BM68 Blade Guard Guide
6F07B Bottom Blade Guard Strap
30A12 Rear Blade Guard Dust Outlet
4BF08X Belt Guard
4BF09X Belt Guard Backing Plate
Clamp and Vise Parts:
400M20 400S Vertical Cylinder Bracket, New Style
4B3P20 Vertical Clamp Cylinder, Light Duty
4B3P30C Vertical Clamp Pad Assembly, Light Duty
4BF90 Vertical Air Vise Bracket
4B7P20 Quick Action Vise, Large
4BM96 Pad for Quick Action Vise
4BM97 Base for Quick Action Vise
4BM91 Air Vise Jaw
4BM92 Air Vise Base, Angle
4BM93 Fence Support with HAV
B3P243 Vertical Air Vise Cylinder
B3P246 Horizontal Air Vise Cylinder
Base, Disc, and Fence Parts:
41C01 M416/M516 Base
41C02 M416/M516 Disc
41C04L/R Fence Bracket, Left & Right
41E51 M416/M516 Base, Disc & Stand Assembly
41F06 400 Series Floor Stand
41M03A Disc Support, Side
41M03B Disc Support, Front
400M05L/R M416/M516 Fence, Left & Right
41M07 Fence Key Spacer
41M08 Fence Key Support
41M09 400 Series Fence Key
41M10 M416 Fence Nut, Special
41M11 Tab Nut
9B7P38 Mitre Lock Handle
42C01 F426/F526 Base
42E52 F426/F526 Base & Stand Assembly
400M02 F426/F526 Fence
B1P1213 1/2-13 Tee Nut
Parts List
Motor Warranty:
Motors which fail during the warranty period of one (1) year must be returned to an authorized Baldor Service Representative
for examination to determine whether the failure was caused by defective manufacturing. In the event a replacement is required
before factory examination, a motor will be sold at the list price. If the factory authorizes replacement, CTD will credit customer’s
account for the replacement cost. All motors are shipped FOB CTD, Los Angeles, CA plant.
Guarantee:
CTD warrants that their cut-off machines and accessories are free from defect of material, workmanship, and title, and are
of the kind of quality indicated and described in applicable specifications. The foregoing warranty is exclusive and in lieu
of all other warranties, whether written or oral. CTD’s obligation under the foregoing warranty is limited to the repair or
replacement (at CTD’s option) of the part which is defective in materials or workmanship for a period of one (1) year from
the date of shipment to the original purchaser of the equipment. CTD’s liability to the purchaser, whether for warranties,
negligence, or otherwise, shall not in any way include consequential damages, or costs of removing or reinstalling the
products. All parts and machines are shipped FOB CTD, Los Angeles, CA plant.
CTD MACHINES
2300 East 11th Street • Los Angeles, CA 90021-2817
Tele [phone] • FAX [phone]
World Wide Web: http://www.ctdsaw.com e-mail: [e-mail]