Specifications

10
WIRING
Control circuit terminal
3.3 Control circuit terminal
Terminal layout
The terminal functions as the terminal FM for the FM type, and as the terminal CA for the CA type.
Wiring method
! Power supply connection
For the control circuit wiring, strip off the sheath of a cable, and use it with a blade terminal. For a single wire, strip off the sheath of the wire and apply directly.
Insert the blade terminal or the single wire into a socket of the terminal.
(1)Strip off the sheath for the below length. If the length of the sheath peeled is too long, a short circuit may occur with neighboring wires. If the length is too
short, wires might come off.
Wire the stripped cable after twisting it to prevent it from becoming loose. In addition, do not solder it.
(2)Crimp the terminals by inserting the wires into a blade terminal.
Insert wires to a blade terminal, and check that the wires come out for about 0 to 0.5 mm from a sleeve.
Check the condition of the blade terminal after crimping. Do not use a blade terminal of which the crimping is inappropriate, or the face is damaged.
! Blade terminals commercially available (as of February 2012)
A blade terminal with an insulation sleeve compatible with the MTW wire which has a thick wire insulation.
Recommended cable
gauge:
0.3 to 0.75 mm
2
Cable sheath stripping length
Cable gauge (mm
2
)
Blade terminal model
Manufacturer
Crimping tool
name
With insulation
sleeve
Without insulation
sleeve
For UL wire
0.3 AI 0,5-10WH
Phoenix Contact Co., Ltd.CRIMPFOX 6
0.5 AI 0,5-10WH AI 0,5-10WH-GB
0.75 AI 0,75-10GY A 0,75-10 AI 0,75-10GY-GB
0.75 (for two wires)AI-TWIN 2×0,75-10GY
Cable gauge (mm
2
)
Blade terminal product
number
Insulation product
number
Manufacturer
Crimping tool
product number
0.3 to 0.75 BT 0.75-11 VC 0.75 NICHIFU Co.,Ltd. NH 69
(3)Insert the wires into a socket.
When using a single wire or stranded wires without a blade terminal, push the open/close button all the
way down with a flathead screwdriver, and insert the wire.
ÎËÒßÓ
î ë ì ï ÚñÝ õîì ÍÜ ÍÜ Íï Íî ÐÝ ßï Þï Ýï ßî Þî ÝîÍ×Ýͱ ÍÑÝ
ë ïðÛ ïð ÍÛ ÍÛ ÍË ×ÐÚ ÑÔ ÚË ÐÝ ÎÔ ÎÓ ÎØ ÎÌ ßË ÍÜ ÍÜ ÝÍÍÌÐ ÓÎÍ ÎÛÍ ÍÌÚ ÍÌÎ ÖÑÙ
Ý®«³°´»¼ ¬·°
É·®»- ¿®» ²±¬ ·²-»®¬»¼
·²¬± ¬¸» -´»»ª»
˲-¬®¿²¼»¼
©·®»-
Ü¿³¿¹»¼
É
·
®
»
Í
´
»
»
ª
»
ð
¬
±
ð
ò
ë
³
³
ø
ð
ò
ð
î
·
²
½
¸
÷
Ú´¿¬¸»¿¼ -½®»©¼®·ª»®
Ñ°»²ñ½´±-» ¾«¬¬±²