Specifications

2-21
2
Using the Floppy Disk Drive Externally
To remove the floppy disk drive from the optional floppy disk drive box (CE-FC02),
release the lock latch on the base of the cover and pull the floppy disk drive out of
the box.
Release lock latch
on the base
Pull drive out of
box
To use the floppy disk drive as an external drive, follow the steps below:
1. Install the floppy disk drive into the floppy disk drive box. Simply slide the
drive in until it clicks into place.
2. Shut down your computer.
3. Plug the cable from the floppy disk drive box into the parallel/FDD port on the
rear edge of the computer.
4. Restart your computer.