Specifications

6
6-2
3. Use a small, Phillips-head screwdriver to remove the screws. Lift the cover from
the memory compartment using the indent on one side of the compartment
cover.
4. Hold the memory module over the memory compartment. The edge connector
on the module is divided into two unequal parts and the edge connector slot
inside the memory compartment is also divided into two unequal parts. Position
the module so that the edge connector on the module matches the edge
connector slot in the compartment.
5. Hold the module at a slight angle to the base of the unit and insert the edge
connector into the edge connector slot.
Memory module
Edge connector
on module
Edge connector slot
6. After the module is inserted into the slot, press it down flat into the compartment
so that the spring latches inside the compartment grip the edges of the memory
module and hold it in place.
7. Replace the compartment cover and secure it with the screws.
8. Restart your computer.
9. From the
Start
menu, select
Settings
–
Control Panel
.
10. Click
view all Control Panel options
.
11. Double-click
System
icon. You can see new memory status on
General
tab.
Removing a Memory Module
1. Follow the steps from 1 to 3 of
Adding a Memory Module
.
2. Press the spring latches apart so that the memory module pops out of the
compartment and then pull the edge connector of the module free from the edge
connector slot.
3. Remove the memory module.
4. Go back to the step 7 of
Adding a Memory Module
.