Specifications

8-7
8
Resume on Modem Ring
Enables the system to resume from suspend mode when
an incoming call is received by the modem if set to
Enabled
.
The built-in modem may not be available in some countries
.
Resume on Time
Enables the system to resume from suspend mode by an alarm set
on the computer’s realtime clock if set to
Enabled
.
Resume Time
Sets the alarm time if you have enabled the
Resume on Time
.
Cooling Control
Determines how the system controls the thermal management of
your system. If you select
Performance
, the system turns on the cooling fan first
when cooling is required. It only throttles the processor if further cooling is required.
If you select
Silence
, the system throttles the processor first when cooling is
required. It only turns on the cooling fan if further cooling is required.
Boot Page
The
Boot
page shows the order of preference your system follows when it seeks an
operating system at start-up time. To change the order, highlight an item and then
use the
Shift
plus
Plus
keys to move it up, or
Minus
key to move it down the list.
Exit Page
Exit Saving Changes
Saves the settings you have changed and exits the Setup
Utility.
Exit without saving
Exits the Setup Utility without saving the changes you made
during the current session.
Load Setup Defaults
Returns the values of all items to default. To exit, select one
of the above items.
Load Previous Setting
Returns the values of all items to the values you last saved.