System information

No Operation Off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press
c
/
d
to select “Power Control”.
• Power control menu displays.
2
Press MENU and the MENU screen displays.
1
Press
a
/
b
to select “No Operation Off”, and
then press ENTER.
3
Press
a
/
b
to select “Enable”.
• Five minutes before the power shuts down,
remaining time displays every minute.
4
NOTE
• “Disable” is factory preset value.
Ecology
When set “Yes”, the TV activates the following power
saving mode.
• “OPC” set to “On” (Page 23)
• “Standby Mode” set to “Mode 2” (Page 41)
• “No Signal Off” set to “Enable” (Page 27)
• “No Operation Off” set to “Enable” (Page 28)
• “Power Management” set to “Mode 1” (Page 28)
Press
c
/
d
to select “Power Control”.
• Power control menu displays.
2
Press MENU and the MENU screen displays.
1
Press
a
/
b
to select “Ecology”, and then
press ENTER.
3
Press
a
/
b
to select “Yes”, and then press
ENTER.
4
28
Basic adjustment settings (Analogue/Digital)
Power Management
When set, the power will automatically shut down if no
signal is input for a certain time.
Press
c
/
d
to select “Power Control”.
• Power control menu displays.
2
Press MENU and the MENU screen displays.
1
Press
a
/
b
to select “Power Management”,
and then press ENTER.
3
Press
a
/
b
to select “Mode 1” or “Mode 2”,
and then press ENTER.
4
NOTE
• If you turn off the power by disconnecting AC cord when
setting “Mode 2” in power management, the TV may not
function properly after turning the power on again. In such
case, press POWER on the remote control unit.
• Pressing POWER on the TV will have the same result.
Off
Mode 1
Mode 2
Selected item
Off
Mode 1
Mode 2
Description
• No power management.
• Factory preset value.
• If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 13.)
• If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 13.)
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
D53X_en_e.indd 28D53X_en_e.indd 28 2007-7-31 9:39:222007-7-31 9:39:22