Datei-Nummern Daten-Dateien Ausdrucke .. Numerische Operatoren Zeichenfolge-Ausdriicke wmwimsmms. Logische Ausdrucke Klammerung und Vorrang der Operatoren .. 13. PROGRAMMIEREN v Programme Baissemeldungen Zellennummern Etikettierte Programme Formatierkommandos (Befehle] Direkt-Kommantos wortloses Strukturierte Basic -kommandos 188 Mai (Betriebsarten) Der Anfang des Programmierens Speichern von Programmen im Computer . Verwendung des Bildschwimm-Editors ) Daten-Dateien Programmierbare Funktionstasten .. 14.
KAPITEL 1 HARDWARE Die ersten Abschnitte von Kapitel 1 sind eins Einfrierung in die speziellen Eigensehatmen tes PC-ES00S*, eine Beschreibung der Hinderungsgrund des Computers, der Bedienung der Tasten und der Bedeutungen der verschiedenen Displaysymbole Die folgenden Abschnitte behandeln RAM Karten und periphere Gerade (wis Diskettenlaufwerke, Drucker und Kassettenrecorder). * Der PC-E5008 wird im folgenden als “der Computer” bezeichnet.
Einschalten Die [ ] -Taste auf der Finken Seite der Computertastatur drucken. Der Computer wird in eine der dre! fangenden Betriebsarten eingeschaltet, entsprechend der zuletzt gewählten Betriebsart: 1. Wenn der Computer aus dem Hauptmont, MATRIX, SATT oder ENG heraus ausgeschaltet wurde, erscheint beim Einschalten das Hauptmond. [BASIC 1T GAL MATRIX SATT 1 ENG 2.
Bel Bedarf werden in dieser Anleitung die Tasten als Kisten mit Symbolen dargestellt, z.8. T8} Zur Unterscheidung der Zahl Null und dem Profibuchstaben "O* erscheint die Null auf dem Display des PC-E500S als “0”. Bei den Beschreibungen dieser Anleitung erscheint die Zahn Null ebenfalls als *8", wenn es zu Verwechslungen kommen konnte, Das Display — AGADIR HvE VAT Der Computer hat ein 4-Zellen-Flissigkdstall-Display mit 40 Zeichen pro Zeile und einer darunterliegenden Statuszeile.
Auswechseln der Batterien Der Computer verwendet zwei Arten von Batterien, nämlich vier Trockenbatterien vorm Typ AAA fair den Betrittst des Computers siebst und eine Lithiumbatterie fair die Speichersicherung. Wenn die Trockenbatterien des Computers zu schwach sind, wehrend der Drucker CE-128P gleichzeitig mif dem Computer verwendet wird, kann er auch {ober den CE128P mit Strom versorgt werden. Dadurch wird dis Belastung dar internen Batterien vermindert.
6. Klicken Sie gleichzeitig die Rundenrekord PLAN-Tasten des Kassettenrecorder, 7. Geben Sie die Aufnahmebefehle ein (SALVE-Kommando, SAUE-Kommando) und drinstecken Sie zum Stand der Austreibung die [e=] -Taste, Bringen Sie den Computer in den Runder PRO-Modus, Danach tricksen Sie folgende Tasters: SALVE "Dateiname” [ Zum Beispiel: SALVE "AA" [ Das Band beginnt sich nach dem Druck auf die -Taste zu drehen und 15t eins Lear stelle von ca. 8 Sekunden (eln Polizeilichen wird herausgenommen.
Eingabe i F [ 3.141592654 Auf der Anzeige erscheint jetzt der Werts von . Nun Soli 10* berechnest werden. Fir diese Berechnung wird die Funktion 10" verwendet, die auch in braun geschrieben ist. Daher muf die {20 7, -Taste gedruckt werden. Eingabe Anzeige 4 7m0 F} 0T (10 = 10090, Folgend werden dle Funktionen der wichtigsten Tasten umrissen: {Böschung) (rote Taste) Wird diese Taste unmittelbar nach Eingabe von numerischen Daten oder Abrufen des Speicherinhaltes gedrillt, werden diese Daten gelacht.
Die Taste [TCE] kann außerdem zur Schnurlos eines Fehlers verwandelt werden. Eingabe Anzeige — s[Eo0l=] [5E] (Anzeigemodus-Schalter) Diese Taste dient zum Umschalten des Anzeigemodus fir das Ergebnis von Berechnungen vom Gleichungssystem {normaler Modus) zu Festpunktsystem (FIX), wissenschaftliche Notation (SCSI, technische Notation (ENG) oder umgekehrt. Eingabe Anzeige 23 1000 =} 23000 B {Normal) FEE Fx 23000.
180° = % (rad) = 2009 DEG: Altgrad [] RAD: Bogenmai fad] GRAD: Neugrad [g] * T bis (o), £ [B& Und T Dient zur Eingabe von Zahlen fn Exponentialfaktor (auf der Anzeige erscheint “E” nach der eingegebenen Zahl). Eingabe Anzeige CEEl4Br 4000. = ~4000. w7 Dient zur Eingabe von negativen Zahlen {Ader zur Umkehrung des Vorzeichens von negativ zu positiv. Eingabe Anzeige 1.23 —1.28 EP |5 128% 167 = =1 Grundlegende Bedienung 1. Addition und Subtraktion Eingabe: 12466 =821 Ergebnis: 286.
S . Multiplikation und Division a. Eingabe: 841 [Nx 1586 (5,112 =] Ergebnis: b. Eingabe: 427 (5717 =139 K5l 2 Ergebnis: 595,8671429 Multiplikation und Division haben Vorrang vor Addition und Subtraktion. Der Computer fuhrt Intel zuerst die Multiplikation und Division durch. Multiplikationen mit ringe Konstanten: Der zuerst eingegebene Wert ist eine Konstante. Eingabe: 3 5= Ergebnis: 15 Eingabe: 101 =] Ergebnis: 30 Divisionen mit einer Konstanten: Der nach d eiszeitlichen eingegebene Wert ist eine Konstant.
im AAL-Modus stehen 26 Speicher zur Verfertigung, die mit (ST01&_] bis [570) 7 spezifiziert werden, aufaddierendem der Speicher, der mil der Taste IXH) spezifiziert wird. Durch Drinstecken der Tasten [$70] & ] werden der numerischen Stringvariablen A Daten zugewiesen, Zum Lesen dieser Daten missen die Tasten [REL [_A_ | gedrillt werden. Das Drinstecken der Tassen A | im RUN-Modus Ist identisch zum Drinstecken der der Tasten Treu] A1 im AAL-Modus.
o 10, Patentfunktionen Aufgabe: 20° Eingabe: 20 [%7] Ergebnis: 400 Aufgabe: 3 und 8° Eingabe: 3[37 3 [ =] Ergebnis: 27 Eingabe: (7 4[ =] Ergebnis: 81 Wurzelfunktionen Aufgabe: V28 Eingabe: 25 [+ | Ergebnis: 5 Wurzel von Ergebnis: 3 Wurzel von 81 Eingebe: Ergebnis: 3 Logarithmische Funktionen Ausgabe: In 21, log 173 Natürlicher Logarithmus Eingabe: 21 12 Ergebnis: 3.044522438 Dekadischer Logarithmus Eingabe: 173 g Ergebnis: 2.238046103 Exponentialfunktionen Aufgabe: & Eingabe: 3.
11. Umwandlung des Winkels und der Zeit Zur Umwenden von Winkelader Zeitangaben °, 7, hzw. Std., Min., Sek) In den entsprechenden Dezimalwert mild der Grad wert als ganze Saht und die Ware in Minuten und Sekunden als Nachkommastellen eingegeben werden. Aufgabe: Umwandlung von in den entsprechenden Dezimalwert Eingabe: 12.4752 [GELEE] Ergebnis: Bsi der Umwandlung des dezimalen in den infinitesimalen Wert 7, ” bzw. Std., Min., Sek.
Eingabe: (=73 3] 143 5 Ergebnis: (x} . Eingabe: ¥ e Ergebnis: 12.12435585 (y) Es wird zuerst 3 errechnet. Nach der Eingabe van r wird es durch r = 14 ersetzt, wenn die [ -Taste getickt! wird. | Verwendung der Klammern-Tasten Dle Verwendung der Klammem-Tanzes [T ] und [T ist dann swingend notwendig. wenn eine Serie von Einzelberechnungen zu einem Rechenvorgang zusammengefasst werden soll und dabei die Vorrangordnung der Operatoren Bauer Kraft gesetzt werden muB.
Beispiel: 05 e[=1 — {Betriebsamkeit) (Die Zahl wird auf die 9. Nachkommastelle gerundet.) [HE] — (SEI-Betriebsart) (Die Mantisse wird auf die 8. Dezimalstelle gerundet.) 208 ¢} IAB {Schachbrettartig) {Die Mantisse wird auf die 4. Dezimalstelle gerundet.) FE —» {Betriebsnah) S -5 Der Wert Ist Im Rechner in der Form von % 107 gespeichert. Die Rundung in der 11. Nachkommastelle dar Mantisse ergibt x 107, Da das Display 10 Stellen anzeigt, ist die Rundung in der Ergebnisanzeige nicht enthalten.
+ Dis Umwandlung einer negativen Dezimalzahl erfolgt indem aber das “Zweierkomplement”. Das Ergebnis wird im “komplementär” angezeigt, Mit der [ J-Taste kann das Vorzeichen der angezeigten Saht gewechselt werden. Wenn das Vorzeichen einer positiven Hexadezimalzahl umgekehrt wird, wird das Komplement der positiven Zahl angezeigt. . Aufgabe: Umwandlung von Dezimal 123,4 in Hexadezimal: Eingabe Anzeige (Zad F] [SEE] 123.4 [NEY 7B.
Beispiel: 5[] Fauler (Symbol *E” wird angezeigt) Bai Divisionen wird immer eine ganze Zahl als Ergebnis angezeigt, Wenn bai dem Tabuisiere der letzten Lageberechnung ein Bruchteil entsteht, wird er abgeschnitten und nur die ganze Zeh des Ergebnisses angezeigt. Beispiel: .. 3 HEX Durch Drinstecken der -Taste kann auf einfache Weise das Komplement der angezeigten Hexadezimalzahl ermittelt werden. Beispiel: ABRUFE] -» HEX AB. HEX « Im EX-Modus kennen die Funktionstasten des Computers nicht verwendet werden.
Beispiel: Bestimme G.G.T. und von zwei ganzen Zahlen, a = 8 und LOM ¥ o= a = § v = 8_ Das Ergebnis ist: A.G.T. = 2 und KG.V. = 2¢ Durch Drinstecken der Taste [« nach Erhalt der Antwort erscheint wieder die Aufforderung zur Eingabe des Wertes fir “a”, Hinweis: » Wenn dis eingegebenen Daten sich außerhalb des zulässigen Bereiches befindet, forder: der Computer zur -meuten Eingabe auf, Wenn nur clippe [T -Taste gedrillt wird, ohne Eingabe von Aalen, gibt der Computer automatisch dia Zah! “1” gin.
#132 ANGETRUNKEN METHODE (Runge-Kutta-Methade) Programm st eine einfache Differentialgleichung erster Ordnung nach dieser Methode. Das Programm bestimmt sequentiell den Wert von y fr sinne bestimmten Wart van x, der der Summe von x; entspricht, und bestimmt dann das Inkrementiere & unter Verwendung von (x. o) als initiale Werte, die vom Benutzer spezifiziert werden. Es werden bis zu 50 Werte fir y geworben.
Eingabe: [FELL ] MATT] [7FL] [FORM] ~ + INTEGRATION + [INFORMANT] 1:exsxdC [[CENTER INTEGRATION Eifelberge Mit den folgenden Tasten wird eine spezifische Gleichung abgerufen: M : Abruf der ersten Ungleichung. Pl * Abruf einer Gleichung fing Schritte vor der gerade angezeigten Gleichung (Gleichung mit der gegenwärtigen Zah! minus 5). [ENTRICHTETER] : Abruf der 21, (mittleren) Gleichung.
#212 METRIK KONVERSION (Metrische Umwandlung) Dieses Programm wandel Einheiten 10r Lungen, Flachen, Volumen, Gewicht und Energien um. Ablesung der Tabelle: ™ n (Ich) £ (Ful) ¥ (Faraday m i 39.3701 3. 28084 1.03361 m] W 0.025¢ : 9.083335) L 0.3048 2 U .33393 B oy 09544 milde 1809344 €3360 5280 1750 S em 0.01 5.293701 0,032508¢ 9.0168361 A tätigt 3.93701 % 10°* 325084 % 16710 1,09361 X 3 pc 0856776 X 10° MAST% 10 | 101236145 X 1017 7452788 {Parser) m 2600621371 L (g 77927 % 19°17 = 157828 X 10 @ 2w SO0 w s 0.
i i | %311 KOMPLEX NUMMER (Komplexe Zahlen) Dissens Programm fuhr unter Verwandlung der folgenden Tasteneingaben Berechnungen mit komplexen Zahlen aus, Taste Funktion Speichert den Wert nach X (in der Getrenntheit der regulieren und imaginären mi e Speichert den Wert nach ¥ {in der Reihenfolge der reellen und imaginären Flut ginge Addition durch und speichert das Ergebnis nach X. :, Flieh eine Subtraktion durch und speichert das Ergebnis nach X.
Mit den folgenden Tasten wird eine spezifische Formel der Elektrotechnik abgerufen: [GELLTE + Abruf der ersten Formel. =] : Abruf einer Formel fit Schritte vor der gerade angezeigten Formel {Formel mit der gegenwärtigen Zahl minus 5), [TRUSTCENTER] : Abi der 7. (mittleren) Formel. (el (=l : Abruf einer Formel finit Schritte nach der gerade angezeigten Forme! (Formei mit der eigenartigen Zahl plus Abruf der 14, {eilen) Formel, o~ : Abruf der Formel direkt nach der gerade angezeigten Formel.
Berechnungen mit Ausdrucken Zur Ausführung von Berechnungen mit gespeicherten Ausdrucken im RUN-Modus folgendermaßen vorgehe: {1) Die [Bast] -Taste zur Einstellung des RUN-Modus drinstecken. (2) Die [finit’ -Taste zum Abrufen von Ausdrucken in Vorwärtsrichtung drinstecken. Zum Abrufen in umgekehrter Reihenfolge die Tasten [ABHILFT] + [Apathie) drucken. (3} Nach dem Abrufen des entsprechenden Ausdrucks die -Taste drinstecken.
Sie erhalten die statistischer Abziehen fir Datensatz B mit den gleichen Tasten, die Sie fir Datensatz A verwendet haben. Um die Berechnungen besser lesbar zu machen, Kinnen Sie die auf Seite 42 beschrieben Funktionierens verwenden. Zur Spezifizierung von drei Dezimalsielen fOr das Berechnungsberganis drinstecken Sfe die Tasten [TSE} 20 F) [TAE] 3] bevor Sie die [PFT] [o4] -Taste drinstecken, EL o) 18.000 [ oex ] .
In diesem Beispiel! ist eine linear Regression durchzuführen. BEE )+ b y=athx . wedel_ CANDELA) | Da x und y sich In den Spalten d1 und d2 befinden, brauchen Sie nur zweimal ) zu drinstecken: == Bestimmen Sie die Koeffizienten « und & sowie den Korrelationskoeffizienten ro e 34, 44951017 101 PF3 | [] ~3.425018830 PRI ~0.989106837 Schatzes Sle als nächstes den Wert ¥ {Datum des Durchzugs) fir r = 9,1 {Durchschnittstemperatur).
[BLUFFE f] 2 7.8057786882 erd ] i 210888247 D 0fa 10e 118 )1« Den Anpassungsfehler des ersten Versuchs abrufen und mit dem des zweiten Versuchs vergleichen: RELIKT 47.71196585 Der Anpassungsfehler ist die Summe der Quadrate der Differenzen zwischen den Werten und den geschnitzten Er dient zur Bestimmung der Berechnungspos Hinweis: Die festen Variablen J bis Z werden fir normale Berechnungen verwendet.
Taste Funktion Addition vor Skala k und den Elementen von Matrix X, #mathematisch ist eine solche Operation nicht existent. Die Addition von Skalieren ist Raine der speziellen Funktionen dieses Computers. Subtraktion von Elementen der Matrix X von Skala k. #thematisch ist eine solche Operation nicht existent. Die Subtraktion: von Skalieren ist eine der speziellen Funktionen dieses Computers.
i 1 In der Betriebsamkeit mus zur Ausgabe eines Ergebnisses die Taste gedrückt! werden, reichlich die [= ] -Taste. Das Display des Computers besteht aus vier Zeilen (jo 40 Zeichen pro Zeile). Alle Eingaben und Reihenergebnisse werden jeweils von der obersten Zeile aus angegeben. Wenn die Daten die Kapazität von 4 Zeilen Unterschieben, wird der Anzeigeinhalt jeweils um eine Zeile nach eben gerollt (die erste angezeigte Zeile roll nach oben aus dem Display).
Da Sie daran gedacht haben, [ zu benutzen, steht der Cursor nun ain Ende der Anzeige. Benutzen Sie noch einmal um den Cursor eine Stelle nach links zu bewegen. 300/6 GEODÄSIE Beachten Sie, daB nach dieser Bewegung der Cursor sich in ein blinkendes Viereck verwandelt. Immer, wenn Sie den Cursor auf ein schon bestehendes Zeichen sitzen, wird er in dieser Form dargestellt. Geben Sie nun anstelle der 6 eine 5 ein.
Zum Lachen von Zeichen wird die [BEL | -Taste gedrillt. Anden der vorherigen Berechnung auf 315 Rufen Sie die Eingabe mit Hilfe von (3] auf. 3000/28 3000/25 Der blinkende Cursor steht nun Geber dem ersten Zeichen der Anzeige. Um die Eingabe zu korrigieren, missen Sle die Nullen Zischen. Wit Hufe von [9] bewegen Sie den Cursor auf die feste Null. Wenn Sie ain Zeichen solchen wollen, seufzen Sie den Cursor auf das zu Entscheids Zeichen.
“Syntax erfror” ist die anfache Art des Computers, ihnen mitzuteilen: *ich weis nicht, was ich hier tun soll.” Wenn Sie in diesem Fall die Taste oder [] betätigen, erscheint der blinkende Cursor an der Stelle, wo der Fehler fegt. [ (oder 1) 300//5 Latex arrogant 800//8 Um diesen Fehler zu korrigieren, benutzen Sie die [TEL] -Taste, B | e 300//5 o Syntax are 300/8 60 Wein Sie bei einem Syntaxfehler feststellen, dal bei der Eingabe sin Zeichen vergessen wurde, kennen Sie es mit Hufe der [NS -Taste einfugen.
Einfache Genauigkeit, doppelte Genauigkeit Die grollte Zahl, mit der der Computer bei einfacher Genauigkeit operieren kann, besteht aus 10 Stellen plus 2 Stellen im Exponenten. Bei doppelter Genauigkeit besten diese Zahn aus bis zu 20 Stall an, D 99 und [ 98 (Das grobe E, waches den Exponenten anzeigt, wird bei doppelter Genauigkeit durch gin grobes D ersetzt) Wacht der Betriebsart filz doppelte Genauigkeit 1.
Der Computer nat aber eine Funktion, die erlaubt, das Ergebnis cer vorherigen Berechnung zurückzuhalten und es irgendwo in der gegenwärtigen Berechnung zu benutzen. Dies ist die Funktion fir das "Latzes Ergebnis.” Der vorige Wert kann beliebig oft zurückgelieferten warten, indem Sie die | aNS | -Taste drinstecken. Wenn Sie das letzte Beispiel eingegeben haben, so drucken Sie und dann [ 285 ], worauf die ‘35" angezeigt wird.
Beispiel: Umwandlung von rechtwinkligen in Polarkoordinaten: Bestimmung der Polarkoordinate {r, 8) for Punkt (2, 8) einer rechtwinkligen Koordinate: Eingabe: DEGRESSIV (Spezifiziert “"Altgrad” als Winkeleinheit.) Pollos sl = [ 30,2618 L 8 644003745 Z [emd] s §.
— Referenz — Ausflicke, die Verhältniswahlen enthalten, Kinnen die in der folgenden Etabliere angefixten Werks annehmen: x und y repräsentieren numerische Werte.
Rechenfehler Folgende Fehlertypen treten bai gewöhnlichen Rechner, Schandtat Personal Computern auf: Fehler, die mit der Anzahl der Dezimalstellen zusammenhingen Normalerweise st die maximale Anzahl der Dezimalstellen, mit denen ein Computer rechnen kann, festgelegt. Zum Beispiel 4/3 eingibt Bei einem Computer it einem Maximum von 8 Stellen wert diese & Ziffern als signifikant bezeichnet, weitere Ziffern werden entweder ignoriert oder gerundet.
Variablen Kornputer sind aus einer Vielzahn von Kesselten Speicherintensiven aufgebaut, genannt Bytes. Jedes Byte kann man sich als einzelnes Zeichen vorstellen. Das Wort “Byte" erfordert beispielsweise vier Speicherbytes, weil es vier Buchstaben enthält. Urn herauszufinden, wievielerlei Bytes zum Arbeiten zur Verfertigung stehen, geben Sie einfach RED ein und drinstecken Die angezeigte Zah gibt an, wievielt Bytes zum Programmieren frei sind.
Bislang haben wir uns nur mit numerischen Zeichen begabt, Wie speicher man nun alphabetische Zeichen? Grundsätzlich ist das Prinzip das gleiche, aber damit der Computer den Unterschied zwischen den baden Variablentypen erkennen kann, muffig nun ein § zum Namen der Variablen gesetzt wetten. Wir wollen z.B, das Wart BYTE unter der Variablen B8 speicher. Beachten Sie das $-Zeichen hinter dem 6. Dies sagt dem Computer, daf der Inhalt der Variablen B$ alphanumerisch baw.
Speichen ven Werten in Variable mit doppelter Genauigkeit 1. Verwendung der Bestimmungszeichen { und #) AB! (oder AB) = 1234567891234567891234 —» 1,234567891 x 107 Der Wert wird mit 10 Stellen mit der s gespeichert.) h genauen Variablen AB! (oder AB AB# = 1234567691234567891234 > 1.2345678912345678312 x 107 Der Wert wird mit 20 Stellen mit der doppelt genauen Variablen AB# gespeichert.
NOT X kann genervt berechne werden durch die Gleichung NOT X Klammerung und Vorrang der Operatoren Bei der Bearbeitung komplexer Ausdrucke folgt der Computer ginge: Rehe vordefinierter Prioritäten, die bestimmen, in wechsel Reihenfolge die Operatoren bearbeitet werden. Das kann sehr wichtig sei 5+ 2% 3 kann sein 5+2=7 oder 2%3=6 7x3=21 B4+ 5=11 Die genauen Regeln des "Operatoren-Vorrangs” werden auf Seite 162 beschrieben.
Der Anfang des Programmierens Nachdem Sie in vielen Übungen den Compilierter als Taschenrechner benutzt haben, sind Sie sicherlich schon recht vertrau mit der Tastatur. Von nun an werden wir, wenn wir eine Eingabe zeigen, nicht firmiere jede Tastenbedienung angeben. Denker Sie immer daran, [SIFF] zu betätigen, um Zugang zu den Zechen oberhalb der Tassen zu bekommen, und vergessen Sie nicht am Ende jeder Zeile die Taste =i 211 betätigen.
Beispiel 2 — Editieren seines Programms Ehren wir an, Sie wollen den Inhalt dessen, was hr Programm anzeigt, verändern, d.h. Sie wollen Ihr Programm editieren, Bei einem einzeiligen Programm kennen Sie die Eingabe schlicht wiederholen, aber wenn Sie komplexer Programme schreiben, wird das Editieren zu seinem wichtigen Bestandteil des Programmierens. Wir wollen das Programm, das Sle gerade geschrieben haben, editieren. Sind Sie noch im RUN-Modus? Wenn Ja, sa schalten Sie zurichte i den Produkts.
KAPITEL 4 COMPUTERANWEISUNGEN Kapitel 4 enthält eine alphabetische Liste aller BASIC-Anweisungen 10r den PC-E5008*. Dieser Abschnitt dient zum Nachschlagen. Der graste Abschnitt enthalten eine alphabetische Liste der numerischen Funktionen und Stringvariablen. Der zweite Abschnalle besteht aus einer alphabetischen Wusle aller anderen BASIC-Anweisungen. * Dar PC-EB00S wird im folgenden als "der Computer” abzeichnest.
FAXT nt Funktion: Fakultät n b Anmerkungen: Zeigt die Fakultät des eigenen Arguments an. Beispiel: FAXT 7 %] 5040 HCS schoss x Funktion: Hyperbolischer Cousins D Anmerkungen: Zeigt den hyperbolischen Cousins des numerischen Arguments an, Beispiel: HOS 8 (2t | 10.
INT Funktion: Ganze Zah! B Anmerkungen; Zeigt die ganze Zahl des eigenen Arguments an. Die ganze Zahn vor Pl ist 3. Beispiel: INT logen Funktion: Natürlicher Logarithmus. D Anmerkungen: Zeigt den Logarithmus der Basis e (2.716281828..) des eigenen numerischen Arguments an. Beispiel: LOG fortging Funktion: Dekadischer Logarithmus mit der Basis 10 o Anmerkungen: Zeigt den Logarithmus der Basis 10 des eigenen numerischen Arguments an. Beispiel: 1.
Pl ® Funktion: Pi D Anmerkungen: Pl ist eine numerische Stringvariable mit dem West n. Die Anwendung von P1 ist identisch mit dem: Gebrauch der 2] -Taste. Der Wert von Pl ist in der einfachen Genauigkeit {DEFTIG-Modus) auf 10 Stellen genau, im Modus der doppelten Genauigkeit: (DEFILEE) 20 Sielen.
REC (6,8) -+ (6y) Funktion: Umwandlung polarer in rechtwinklige Kardinalen 5 Anmerkungen: Wandelt numerische Argument im Polarkoordinaten-Format in ein rechtwinkliges Koordinaten-Format urm. Das erste Argument bezeichnet die Entfernung und das zweite den Winkel, Die Winkelangabe hingt ab van der Einstellung des Compilers {DEG, RAD oder GRAD). Die umgeschrieben Werte, die Entfernungen von dar x-Achse und der y-Achse, werden den fasten Variablen ¥ und Z zugewiesen.
16. COMPUTER-ANWEISUNGEN (BASIC KOMMANDO LEXIKON) e folgenden Seiten enthalten ein Auflistung aller BASIC-Kommandos, die Sie auf dem Computer benutzen kennen. Dias Auflistung finde sich auch innen aul der festen Abdeckung des Computers. Der Einfachheit halber wurden fir diesen Nachschlageteil folgende Symbole hinzugefügt: Ausdruck Zeigt einen numerischen Wert, eine numerische Variable oder Formel an, einschließlich der numerischen Werte und der numerischen Variablen.
AER FORMAT: AER Zah! [ (Ausdruck, Ausdruck, ) ] Abkürzung: AE. Siehe auch: WIRKUNG: Zur Ausleihung algebraischer Ausdrucke, die in der ER-Betriebsart gespeichert verdauenden. ANMERKUNGEN: AER wandelt die in AER gespeicherten Ausdrucke in BASIC-Programme um. Die Nummer des zugewiesenen algebraischen Ausdrucks angeben; der Computer ruft diesen Ausdruck auf und fuhrt hn aus. Wenn ginge nicht zugewiesene Nummer angegeben wird, erfolgt ein Fehler.
Ausdrucke 1 und 2 sind fir die Angabe der Koordinaten X und ¥ zur Bestimmung des Mittelstandskreise. Die Werte der Ausdrucke 1 und 2 missen in einem Bereich von -999 bis 939 fegen. Ausdruck 3 bestimmt den Radius. Der Wert fair Ausdruck 3 muf innerhalb des Bereichs von 1 bis 429 (1 = Ausdruck 3 = 499) liegen, Ausdruck 4 bestimmt die Farbe der gezogenen Leine. Der Wert fir Ausdruck 4 kann zwischen O und 3 legen. (Siehe CHLOR r Farben und zugehörige Werts des böswilligen Druckers).
ÖLCURSOR o FORMAT: ÖLCURSOR (Ausdruck 1, Ausdruck 2} Abkürzung: Gl Siehe auch: WIRKUNG: Versetzt den Druckkohl. ANMERKUNGEN: ÖLCURSOR ist nur im Grafikmodus zur Bewegung des Druckkopfes in Und Benachrichtigung vom Ursprung aus wirksam. Der Druckkopf bewegt sich hierbei 2u dem Putin des Koordinatenpaars, das mit Ausdruck 1 (X-Achse) und Ausdruck 2 (Achse) bestimmt wurde. Die Warte f0r die beiden Ausdrucke missen innerhalb des Bereichs vor —899 bis 998 legen.
Beispiel 1: IF A< ATHEN +B:GOTO S0 Wenn A Kleiner als § ist wird das Produkt, A%B auf C zugewiesen und nach Zeile 50 Übergegangen, Beispiel! 2: 'F B=C+1 TOTO 60 LESE 100 oder IF B=C+1 ATHEN 60 LESE 100 Wenn B gleich C+1 Ist, wird auf Zeile 60 Übergegangenen, andernfalls auf Zeile 100, Die Bedingung in einer IN-Anweisung {z.B.
LET ° FORMAT: 1 LET numerische Variable = Ausdruck 2. LET Zeichenfolge-Variable = Zeichenfolge Abkürzung: LE. Siehe auch: WIRKUNG: LET wird benutzt, um einer Variablen gingen Wert zuzuweisen. ANMERKUNGEN: Mit LET weisen Sie der angegebenen Variablen den Wert des Ausdrucks zu. Die Form des Ausdrucks muB mit der Variablen übereinstimmen, dh. nur numerische Ausdrucke kennen numerischen Variablen und nur Zeichenfolge-Ausdriicks kennen Zeichenfolge-Variablen zugewiesen werden.
LINDE > FORMAT: LINDE {(Ausdruck 1, Ausdruck 2)] (Ausdruck 3, Ausdruck Ausdruck Ausdruck 5] LlBF}] Abkürzung: LiN. Siehe auch: -CURSOR, -SET WIRKUNG: Zeichnet eine Linie zwischen den bestimmten Punkten.
LIST FORMAT: 1.LIST 2. LIST Hitzeflimmernd 3. LIST *Etikett [t ] Abkürzung: 1. Siehe auch: -list, PASS WIRKUNG: Mit fern LIST-Kommando wird ain Programm zur Anzeige gebracht, ANMERKUNGEN: Nur gilt als direkte Eingabe in der Betriebsamkeit. Mit Format 1 wird das Programm von der ersten Zelle angezeigt, bis das Display all ist, Mit Format 2 wird das Programm von der angegebenen Zeilennummer angezeigt, bis das Display voll ist. Mit der ¥ ] -Taste kommen Sis In die naschte Seife der Liste.
| | LEINE FORMAT: LEINE 1, Ausdruck 2} ~ (Ausdruck 3, Ausdruck 4} [ Ausdruck 5|, Ausdruck 8Jf, B] Abkürzung: LIND. Siehe auch: REINE, PATIN, CHLOR WIRKUNG: Verbindet zwei gegebene Punkte durch eine Uni (CE-515P). ANMERKUNGEN: LEINE ist nur im Grafikmodus wirksam und wird verwendet, urm den mit (Ausdruck 1, Ausdruck 2) bestimmten Koordinatenpunkt durch alte Linie mit seinem zweiten Koordinatenpunkt {Ausdruck 3, Ausdruck 4} zu verbinden. Die Angaben fir {Ausdruck 1, Ausdruck 2) kennen ausgelassen werden.
Es ernennen bis zu 256 Byte fur ein Programm auf einmal geladen werden. Wann vor dam Laden von mehr als 256 Byte ekeln Begrenzer aufgefunden wird, erfolgt sin Fahler, Wenn zum Laden ein serielles verwendet wird, kennen Begrenzer und der Code fr das Ende der Datei mil dem POPEN-Befehl eingegeben werden. (Wein kein Code #r das Ende der Datei empfangen wird, kann der Ladevorgang mit der FREAK -Taste beendet werden.
BEISPIEL: OPELS 1200, N, 8,1, A, C. PYTHIA N, 3 T PATIN b FORMAT: PATIN Ausdruck 1 [, Ausdruck 2] ‘ Abkürzung: PAL Siehe auch: LEINE, REINE, CHLOR WIRKUNG: Dient zum Schraffieren eines Rechtecks oder Kreises. ANMERKUNGEN: PATIN ist nur in der Grafik-Betriebsart wirksam. Bei Rechtecken, die mit dem Befehl LEINE oder REINE mit der Option B gezeichnet werden, konnten fir Ausdruck 1 die Werte 0 bis 10 spezifiziert werden, Ausdruck 2 dient zum Angeben der Farbe fir die Schraffierung.
RESTOHRE FORMAT: 1, RESTOHRE {Ausdruck} +Etikett 2, RESTOHRE Abkürzung: RES. Siehe auch: DATA, RED WIRKUNG: RESTOHRE wird benutzt, um Werte in einer DATA-Anweisung mehrmals zu lesen oder die Reihenfolge, in der diese Werte gelesen werden sollen, zu andrem, ANMERKUNGEN: Helm normalen Gebrauch von HERD beginnt der Computer das Lesen bis im ersten Wert in einer DATA-Anweisung und geht sequentiell durch alle übrigen Werte.
BEISPIEL: 5: POPEN 10: GRAPH 20: FOR A =170 50 30: REINE (0,0) 40: RUNE (0,0 (40,30) 50; NETT A €0 -TEXT 70: SPRINT 80: END ST TN RND o FORMAT: RND numerischer Ausdruck Abkürzung: BN. Flehe auch: RANDOMISIER WIRKUNG: RND erzeugt eins Zufallszahl. ANMERKUNGEN: Ist der Wert des Ausdrucks kleiner als 1, bar grober oder gleich Null, so ist dig Zufallszahl keiner als 1 und grober oder gleich Null.
TEXT > FORMAT: TEXT [t Abkürzung: TE. Hisse auch: BASIC WIRKUNG: Schaltet den Computer in den Taximodus. ANMERKUNGEN: Mur glitt als direkte Eingabe in der Betriebssicherst, Die TEXT-Funktion wird gebraucht, wenn ein Programm In den Computer eingegeben warten soll, das fir einen gröberen Personal Computer geschrieben wurde. Die Eingabe kann auch live das serielle Ein-fAusgabe-Intarface erfolgen. Die Ausführung des TEXT-Kommandos schafftet den Computer in den Textmodus.
oL+ Zum Laschen van Text von der eigenwilligen Kursorposition bis zum Ende der Zeile. EHR) + [ » Zum Laschen der ganzen Zelle, auf der sich der Cursor gerade befindet. « Zur Kontrolle von Kombinationen wird die [GALT] -Taste gestrickt gehalten und dann eine zweite Taste gedrillt. [HIELTET] + (A s Zur Berechnung van Potenzen. « Zur Spezifizierung van wissenschaftlichen Notationen fir numerische Daten {0r Stringzuweisungen. Zur Eingabe von logischen Operationen bei IN-Anweisungen.