Specifications

Communication Functions 5-1
5
Infrared Communication
Using the IR port located on the right side of your notebook, you can wirelessly
communicate with ifrared-equipped devices such as a Sharp electronic organizer,
computers or printers. Refer to the manual or online help of each application for the
detail.
Positioning and Preparing the Notebook and the Target Device
Before you establish wireless communication, both the notebook and the target
device should be properly positioned. Locate your notebook in a flat place and then
place the target device so that their IR ports are in line and within approximately 30
inches (80 cm) of each other.
When using a Sharp electronic organizer, make sure they are within 15
inches (40 cm) apart.
Setting for Each Application
You need to set the IR type for each communication application.
Application IR Type
Windows 95 IrDA
Communication
TranXit (Variable mode) IrDA Disabled
ZR-PL0 ASK Disabled
Import/Export ASK Disabled
Windows 95 Communication Application
(Direct Cable Connection, etc.)
IrDA Enabled
To adjust IR type,
1. From the Start menu, select Settings - Control Panel.
2. Double-click the IR type icon.
3. Select the appropriate IR type (ASK or IrDA).
4. Click OK.
Do not use the Setup Utility to adjust the IR type.