User Manual

ManualsBrandsSHARP ManualsData / Video ProjectorPG-C30XE

Operation

• Values with a minus (ⳮ) sign indicate the distance of the lens centre below the bottom of the screen.

45.5 cm

30.2 cm

22.8 cm

15.5 cm

13.0 cm

11.2 cm

9.4 cm

6.1 cm

Distance from the lens centre to the

bottom of the image (H)

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

Move the projector forward or backward if the edges of the image are distorted.

• The projector lens should be centred in the middle of the screen. If the lens centre is not perpendicular to the screen, the image will be

distorted, making viewing difficult.

• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out colours, making viewing

difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

• A polarizing screen cannot be used with this projector.

Place the projector at the required distance from the screen according

to the desired picture size (see the table below).

Maximum

14.0 m

9.3 m

7.0 m

4.7 m

4.0 m

3.4 m

2.8 m

1.9 m

Minimum

10.8 m

7.2 m

5.4 m

3.6 m

3.0 m

2.6 m

2.2 m

1.4 m

Projection distance (L)

Picture size (diag.) (X)

NORMAL Mode

(4:3)

WIDE Mode

(16:9)

ⳮ12.7 cm

ⳮ8.5 cm

ⳮ6.4 cm

ⳮ5.7 cm

ⳮ4.5 cm

ⳮ4.3 cm

ⳮ3.9 cm

ⳮ3.6 cm

ⳮ3.1 cm

ⳮ2.6 cm

ⳮ1.7 cm

Distance from the lens centre to the

bottom of the image (H)

Maximum

15.1 m

10.1 m

7.6 m

6.7 m

5.4 m

5.1 m

4.6 m

4.3 m

3.7 m

3.0 m

2.0 m

Minimum

11.6 m

7.7 m

5.8 m

5.1 m

4.1 m

3.9 m

3.6 m

3.3 m

2.8 m

2.3 m

1.5 m

Projection distance (L)

Setting up the Screen

Standard Setup (Front Projection)

762 cm (300⬙)

508 cm (200⬙)

381 cm (150⬙)

254 cm (100⬙)

213 cm (84⬙)

183 cm (72⬙)

152 cm (60⬙)

102 cm (40⬙)