BioProcess Technologies pH | Dissolved Oxygen Bioprocess Analytical Measurements Catalog 2014 Sensors, Instrumentation, Equipment and Supplies for Analytical Bioprocess Applications ®
-order-page_2013.pdf 1 8/11/14 10:00 AM atalog The BioProcess Technologies® Catalog The BioProcess Techno Visit Our Website Need more information about products in our catalog? Please visit our website C M Y CM MY Here’s what you’ll find online: CY CMY Technical support K Product manuals Installation requirements Instruction sheets Newsletters Maintenance Instructions Contact information Additional products … and more www.broadleyjames.com 2 Broadley-James Corporation (U.S.
-order-page_2013.pdf 1 8/11/14 10:01 AM nologies® Catalog The BioProcess Technologies® Catalog The BioProc To Place An Order Your First Source for BioProcess Control Equipment and Supplies Accepted for payment C M Y CM Phone Toll-Free: 1-800-288-2833 This catalog is a source for instruments, sensors, tools, accessories and maintenance supplies for use in microbial fermentation and cell culture bioprocess applications.
-ph-measurement_2013.pdf 1 8/11/14 10:03 AM trodes pH Electrodes pH Electrodes pH Electrodes pH Electrodes p FermProbe pH Electrodes ® Steam Sterilizable and Autoclavable C M Y CM Original T-Pull® Cap A concept pioneered by Broadley-James, this unique approach greatly improves the serviceability of pH electrodes. The rugged cap facilitates removal from the vessel, prevents cable damage, and allows for optimum routing of cable to the instrument.
_ph-measurement_2013.pdf 1 8/11/14 10:04 AM pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH Elec pH Electrode Design Suitable for Hygienic Applications. The FermProbe withstands Steam in Place (SIP) and caustic Clean in Place (CIP) applications. FDA compliant o-rings are used throughout. Y CM MY CY To achieve longer life, the electrolyte inside a pH electrode is thickened with an additive.
-overview_2013.pdf 1 8/11/14 10:04 AM rodes pH Electrodes pH Electrodes pH Electrodes pH Electrodes p FermProbe® pH Electrode and Housing System Overview F-615 pH FermProbe See page 12 Side Mount F-607 pH FermProbe See website 330 F-600 pH FermProbe See website 320 336 C Housings for standard 25 mm side ports See page 24 326 Housings for B.
-overview_2013.pdf 1 8/11/14 10:06 AM pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH Elec F-695 FermProbe with K9 cap See page 16 Side Mount 335 325 Standard 25 mm See page 30 F-635 FermProbe with S8 cap 356 See page 14 346 C Metric Housings for 25 mm side ports B. Braun Biotech See page 26 M Y Headplate with Pg 13.5 threads CM MY CY CMY K Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: sales@broadleyjames.
-how-to-select_2013.pdf 1 8/11/14 10:07 AM odes pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH How to Select a FermProbe® pH Electrode STYLE 1 (see page 12) F-615 pH electrode with T-Pull cap FermProbe® pH Electrodes with T-Pull® Cap The T-Pull cap eases installation and removal of the electrode from the housing and greatly reduces fatigue of the extension cable.
-how-to-select_2013.pdf 1 8/11/14 10:07 AM H Electrodes pH Electrodes pH Electrodes pH Electrodes pH Elect How to Match Electrodes to Housings Housings and FermProbe® pH electrodes are offered in a variety of lengths. This enables fermentation operators to select the optimum insertion length for the application at hand. The housing ordering information box lists the suitable electrode models and lengths for each particular housing style.
-3-cap-styles_2013.pdf 1 8/11/14 3:34 PM odes pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH What’s the difference between the 3 cap styles? T-Pull® Cap The T-Pull handle eases installation and removal of the electrode from the housing and greatly reduces fatigue of the extension cable. The electrode can be removed from the housing without rotating the electrode and twisting the cable. Also, the retainer nut is part of the handle and cannot be lost or misplaced.
-3-cap-styles_2013.pdf 1 8/11/14 10:09 AM H Electrodes pH Electrodes pH Electrodes pH Electrodes pH Elect F-615 pH FermProbe T-Pull® cap style For electrode see page 12 For cable see page 70 C M Y F-635 pH FermProbe CM Standard S8 Metric cap style MY CY For electrode see page 14 CMY K For cable see page 70 F-695 pH FermProbe K9 Metric cap style For electrode see page 16 For cable see page 72 Broadley-James Corporation (U.S.
-T-pull_2013.pdf 1 8/18/14 11:09 AM odes pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH T-Pull®pH FermProbe® — Style 1 The T-Pull style FermProbe pH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstand repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes.
-T-pull_2013.pdf 1 8/11/14 10:11 AM H Electrodes pH Electrodes pH Electrodes pH Electrodes pH Elect 25 mm Side Port Housings 330 F-615 pH FermProbe 320 Housings for standard 25 mm side ports See page 24 336 326 C Housings for B. Braun Biotech 25 mm side ports See page 26 M Y CM MY CY CMY K How to Order an Electrode (1) Choose Electrode Model. If the electrode needs to fit an existing cable, check the cable connector and note its color.
-standard_2013.pdf 1 8/18/14 11:10 AM odes pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH pH FermProbe®with S8 Metric Cap — Style 2 This FermProbe pH electrode has the standard Broadley-James S8 connector. Additionally, it features a metric threaded, polymer cap which allows it to be used with European style electrode housings. CLASS F 200 mm length All FermProbe pH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used.
-standard_2013.pdf 1 8/11/14 10:12 AM H Electrodes pH Electrodes pH Electrodes pH Electrodes pH Electr 325 25 mm Side Port Housings 335 F-635 pH FermProbe with S8 metric cap Metric housings for standard 25 mm side ports See page 30 346 356 Metric housings for B. Braun Biotech 25 mm side ports See page 26 C M Y CM MY CY How to Order an Electrode CMY K (1) Choose Electrode Model. If the electrode needs to fit an existing cable, check the cable connector and note its color.
-k9_2013.pdf 1 8/29/14 10:17 AM odes pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH pH FermProbe®with K9 Metric Cap — Style 3 The FermProbe pH electrode is available with the K9 metric cap style. This K9 connector cap expands the Broadley-James offering to make it completely compatible with any existing system, regardless of the installed cable type. CLASS F 200 mm length All FermProbe pH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used.
-k9_2013.pdf 1 8/11/14 10:13 AM H Electrodes pH Electrodes pH Electrodes pH Electrodes pH Electr 325 25 mm Side Port Housings 335 F-695 pH FermProbe with K9 metric cap Metric housings for standard 25 mm side ports See page 30 346 356 Metric housings for B. Braun Biotech 25 mm side ports See page 26 C M Y CM MY CY CMY How to Order an Electrode K (1) Choose Electrode Model. If the electrode needs to fit an existing cable, check the cable connector and note its color.
-how-to-choose_2013.pdf 1 8/11/14 10:14 AM sings pH Housings pH Housings pH Housings pH Housings pH How to Choose a Housing Style: Indentifying the Vessel Port Style The electrode housing is designed to hold and protect the pH electrode while inserting it into the bioprocess vessel. There are various types of side entry ports and different groups of housings to fit each port type. The size and make of the port must first be identified in order to narrow the selection process.
-how-to-choose_2013.pdf 1 8/11/14 10:14 AM Housings pH Housings pH Housings pH Housings pH Housings Dual pH electrode and D.O. sensor side ports on a B. Braun Biotech 400 liter bioreactor. pH electrodes and housings available for this port. Cutaway of vessel wall with housing and electrode installed. T-Pull® style FermProbe® Model 330 C Model 320 M Y CM MY CY CMY K T-Pull® style FermProbe® Model 336 Model 326 Broadley-James Corporation (U.S.
-novaseptic_2013.pdf 1 8/11/14 10:15 AM usings pH Housings pH Housings pH Housings pH Housings pH Ho How to Choose a Housing Style: Additional Sanitary Installations In addition to the standard types of entry ports found on the previous pages, there are other options for sanitary ports. These electrode housings are designed to hold and protect the pH electrode while insertion into sanitary pipe tees and NovAseptic’s sanitary side ports.
-novaseptic_2013.pdf 1 8/11/14 10:15 AM ousings pH Housings pH Housings pH Housings pH Housings pH Cutaway of vessel wall with housing and pH electrode installed T-Pull® style FermProbe® Model 367 C M Y CM MY CY CMY K Model 615 FermProbe pH electrode & Model 357 Housing installed in a 1 1/2” sanitary pipe tee Model D215 OxyProbe D.O. sensor installed in a 1 1/2” sanitary pipe tee Cutaway View Broadley-James Corporation (U.S.
23-3-common_2013.pdf 1 8/11/14 10:17 AM usings pH Housings pH Housings pH Housings pH Housings pH Two Most Frequently asked Questions 1. Do I want a Guarded or Unguarded Housing? The electrode/housing assembly can accidentally “bump” into the 25 mm port when being installed. If the pH sensing glass bulb of the electrode is not protected by a housing bulb guard, the electrode can easily be shattered. A guarded housing design is often the engineer’s first choice when choosing an electrode housing.
24-25mm-side_2013.pdf 1 8/11/14 10:17 AM sings pH Housings pH Housings pH Housings pH Housings pH Hou Housings for Standard 25 mm Side Ports Built-in, free-spinning, threaded retainer nut The 320 and 330 style electrode housings are designed to be used with the Model F-615 style FermProbe® pH electrode. These housings fit nearly all standard 25 mm side ports found in production and pilot plant vessels and are available in a variety of different lengths to suit your application.
25-25mm-side_2013.pdf 1 8/11/14 10:18 AM usings pH Housings pH Housings pH Housings pH Housings pH H Model 320 Insertion Lengths CLASS A CLASS B Model 330 Insertion Lengths 1.5" 38 mm 2.6" 66 mm CLASS A CLASS B 2.1" 53 mm 3.2" 81 mm C M Y CM MY CY CMY K How to Order a Housing (1) Confirm that the vessel has a standard 25 mm side port. Cutaway views and dimensions are shown on pages 18 and 19. (2) Determine whether the application will permit the use of a bulb guard on the housing.
26-b-braun_2013.pdf 1 8/11/14 10:19 AM sings pH Housings pH Housings pH Housings pH Housings pH Ho Housings for B. Braun Biotech 25 mm Safety Side Ports There are two FermProbe® electrode housing designs, standard and metric, for B. Braun Biotech 25 mm side ports. These housings incorporate the latest B. Braun Biotech design requirements and are compatible with both the new 25 mm safety ports and the older 25 mm port designs. Guarded and unguarded versions are available.
27-b-braun_2013.pdf 1 8/11/14 10:20 AM usings pH Housings pH Housings pH Housings pH Housings pH H F-615 FermProbe 25 mm Side Port Housings 336 326 Housings for B. Braun Biotech 25 mm side ports F-695 FermProbe C M 356 Y F-635 FermProbe CM MY 346 CY CMY K How to Order a Housing (1) Confirm that the vessel has a B. Braun Biotech 25 mm side port. Cutaway views and dimensions are shown on pages 18 and 19. is prone to clog the guard area of the housing.
28-flange_2013.
29-flange_2013.pdf 1 8/11/14 10:21 AM usings pH Housings pH Housings pH Housings pH Housings pH H Exploded and Inserted Views Cutaway of vessel wall with housing and pH electrode installed. C M Y CM MY CY CMY Model 367 Guarded Housing Installed in a 1 1/2” Tee K Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: sales@broadleyjames.
-flange_2013.pdf 2 8/11/14 10:21 AM usings pH Housings pH Housings pH Housings pH Housings pH H Exploded and Inserted Views Cutaway of vessel wall with housing and pH electrode installed. C M Y CM MY CY CMY Model 367 Guarded Housing Installed in a 1 1/2” Tee K Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: sales@broadleyjames.
-metric_2013.pdf 1 8/11/14 10:21 AM sings pH Housings pH Housings pH Housings pH Housings pH Hou Metric Housings for Standard 25 mm Side Ports These housings are designed to be used with models F-635 and F-695 Metric FermProbe® electrodes and models D140 and D145 12 mm OxyProbe® sensors. They are also compatible with any sensor that has Pg13.5 threads. These housings fit nearly all standard 25 mm ports found on production and pilot plant vessels.
-metric_2013.pdf 1 8/11/14 10:22 AM usings pH Housings pH Housings pH Housings pH Housings pH H F-695 pH FermProbe® with K9 Metric Cap Top Mount Housings See website F-635 pH FermProbe® with S8 Metric Cap 335 Side Mount Housings C M Y CM Housings for standard 25 mm side ports 325 MY CY CMY K How to select the correct housing (1) Confirm that the opening is a standard 25 mm side port. Cutaway views and dimensions are shown on pages 18 and 19.
-redox_2013.pdf 1 8/11/14 10:23 AM rodes Redox Electrodes Redox Electrodes Redox Electrodes Redo Redox Electrodes pH Electrode Redox Electrode F-915 Redox FermProbe with T-Pull® Cap pH sensitive glass bulb Redox sensitive Pt band Redox FermProbes® C M Fits all suitable FermProbe housings Y Works with standard FermProbe cables CM MY Compatible with pH transmitters that have a millivolt display mode.
-redox_2013.pdf 1 8/11/14 10:23 AM ox Electrodes Redox Electrodes Redox Electrodes Redox Electrode F-995 Redox FermProbe with K9 Metric Cap F-935 Redox FermProbe with S8 Metric Cap C M Y CM MY CY How to Order a Redox Electrode (1) Choose Electrode Model. If the electrode needs to fit an existing cable, check the cable connector and note its color. If the cable connector is black and has an S8 connector, use the F-915 or F-935 Redox FermProbes.
-do-measurement_2013.pdf 1 8/11/14 10:24 AM sors Dissolved Oxygen Sensors Dissolved Oxygen Sensors Dissolv OxyProbe D.O. Sensors ® Steam Sterilizable and Autoclavable Original T-Pull® Handle Developed by Broadley-James, this right angle handle design allows for easy retraction of the sensor from the vessel, and for easy routing of the cable away from harms way.
-do-measurement_2013.pdf 1 8/11/14 10:25 AM ved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxygen D.O. Sensor Design Performance Specifications Measurement principal: Amperometric – Polarographic Output signal in air: Approx. 67 nA at 25˚C Temperature range: Operation: 0 to 80˚C Sterilization: Max. 135˚C Stability: Better than 2% of readout per week at constant pressure and temp. (30˚C) Maximum Pressure: 4 bar (atm.
-25mm_2013.pdf 1 8/11/14 10:25 AM nsors Dissolved Oxygen Sensors Dissolved Oxygen Sensors Disso OxyProbe® D.O. Sensors for Standard 25 mm Side Ports Right angle connector Right angle connector C M Y Model D400 CM 70 mm length Model D405 70 mm length MY CY Model D400 OxyProbe® D.O. Sensor Series CMY K The OxyProbe® D400 series dissolved oxygen sensor offers the most rugged design for 25 mm side ports.
-25mm_2013.pdf 1 8/11/14 10:26 AM olved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxyge What makes OxyProbe® sensors unique? The internal seals of an OxyProbe are all mechanical seals using o-rings. There are no adhesives to leak or fail in process, making this a more rugged and reliable sensor. Replacing the cathode is also much easier and faster since there is no sealant to clean from the integral threads.
-b-braun_2013.pdf 1 8/11/14 10:26 AM nsors Dissolved Oxygen Sensors Dissolved Oxygen Sensors Disso OxyProbe® D.O. Sensors for B. Braun Biotech 25 mm Safety Side Ports Standard Insertion Length Extended Insertion Length C M Y Model D435 Model D430 70 mm length 70 mm length CM MY Model D430 Series OxyProbe® D.O. Sensors CY The ports of B. Braun Biotech fermentation vessels are longer and have a slightly different internal design.
-b-braun_2013.pdf 1 8/11/14 10:27 AM olved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxyge B. BRAUN BIOTECH 25 mm SAFETY PORT. Found exclusively on vessels manufactured by B. Braun Biotech. This style of port is longer than the standard port and needs a special housing to fit correctly. (Note: The port opening on newer tanks is 30 mm i.d. and narrows to 25 mm i.d. at the critical point where the housing o-ring seals to the inside wall of the port.
-advert.pdf 1 8/11/14 10:28 AM nsors Dissolved Oxygen Sensors Dissolved Oxygen Sensors Disso Broadley-James® Smart Polarizer Conditions a Polarographic D.O. Sensor AM-9660 BENEFITS: • Full zero and air test to verify the dissolved oxygen sensor is fit for purpose. C M Y • Prevents a faulty sensor being fitted to a vessel. CM MY • Simplifies testing procedures. CY CMY • Reduces operational costs. K FEATURES: • Convenient: One unit to test and polarize.
-25mm-flange_2013.pdf 1 8/11/14 10:29 AM olved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxyge OxyProbe® 19 mm D.O. Sensors for 19 mm Top Ports Model D200 Series The OxyProbe® 19 mm dissolved oxygen sensor features the same rugged and versatile design as the 25 mm OxyProbe. Although the 19 mm OxyProbe sensor has a slightly smaller diameter than the 25 mm sensor, it utilizes the same anode/cathode assembly and membrane cartridges.
41-25mm-flange_2013.pdf 2 8/11/14 10:29 AM olved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxyge OxyProbe® 19 mm D.O. Sensors for 19 mm Top Ports Model D200 Series The OxyProbe® 19 mm dissolved oxygen sensor features the same rugged and versatile design as the 25 mm OxyProbe. Although the 19 mm OxyProbe sensor has a slightly smaller diameter than the 25 mm sensor, it utilizes the same anode/cathode assembly and membrane cartridges.
42-novaseptic_2013.pdf 1 8/11/14 10:29 AM nsors Dissolved Oxygen Sensors Dissolved Oxygen Sensors Disso OxyProbe® D.O. Sensor with 1.5” Sanitary Flange for Sanitary Pipe Tee and Novaseptic Side Ports Model D210 Series OxyProbe® D.O. Sensors These sensors are unique in their construction. The front end of the sensor is the same as the 19 mm sensor, with the smaller diameter and no crevices or o-rings. It fits directly into a 1.
43-novaseptic_2013.pdf 1 8/11/14 10:30 AM olved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxyge Standard Mounting for Model D210 Series D.O. Sensors The Models D210 Series D.O. OxyProbe sensors are intended for use in a 1 1/2” sanitary pipe tee. The sensor is secured into the tee with a standard flange clamp sealed with a flange gasket. The tip of the sensor is positioned in the middle of the process flow when it is placed in a standard size tee.
44-benchtop_2013.pdf 1 8/11/14 10:30 AM nsors Dissolved Oxygen Sensors Dissolved Oxygen Sensors Disso OxyProbe® 12 mm D.O. Sensors for Benchtop Vessels Model D140 Series OxyProbe® D.O. Sensors The OxyProbe 12 mm dissolved oxygen sensor offers the most rugged and versatile design for benchtop vessels. The compact profile saves space on a crowded headplate. It will fit directly into any 12 mm multipurpose port with standard compression fittings or Pg13.5 threads. The small diameter facilitates D.O.
45-benchtop_2013.pdf 1 8/11/14 10:31 AM olved Oxygen Sensors Dissolved Oxygen Sensors Dissolved Oxyge & TIPS HINTS How to Select Sensors for Benchtop Vessels Typically a benchtop application is less than 5 L, and uses a glass vessel or flask. Usually the entire vessel can be placed or wheeled into an autoclave for sterilization prior to a run.
46-maint-section-intro_2013.pdf 1 8/11/14 10:32 AM ance Maintenance Maintenance Maintenance Maintenance Maint Maintenance Service and Supplies C M Y CM MY CY CMY K 46 Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: sales@broadleyjames.
47-maint-section-intro_2013.pdf 1 8/11/14 10:33 AM tenance Maintenance Maintenance Maintenance Maintenance M Improved Sensor Performance & Longevity Broadley-James® Maintenance Supplies, Designed to make your job easier. The primary components of a Dissolved Oxygen or pH measurement loop are the sensors and the transmitters. The sensors are designed to be as robust as possible, but still require regular inspection and maintenance.
48-rebuild-serv_2013.pdf 1 8/11/14 10:34 AM ance Maintenance Maintenance Maintenance Maintenance Maint Complete Rebuild Service for 25 mm, 19 mm and 12 mm D.O.
49-rebuild-serv_2013.pdf 1 8/11/14 10:35 AM tenance Maintenance Maintenance Maintenance Maintenance Ma Precisely ground glass to allow thin, even layer of electrolyte solution to form under membrane Special conical gasket to position cartridge 5. Replace Membrane Cartridge The silicone membrane is reinforced with stainless steel mesh and can easily be damaged. Just a bump on a hard surface can ruin its integrity.
50-replace-parts_2013.pdf 1 8/11/14 10:35 AM ance Maintenance Maintenance Maintenance Maintenance Ma Replacement Parts for 25 mm and 19 mm D.O. Sensors Cathode Removal Tool The two notches in the bottom of this stainless steel tool fit into the grooves of the cathode retainer nut to quickly remove the nut and the cathode assembly. The knurled handle provides sufficient grip to tighten the retainer nut to the proper torque eliminating the need for additional tools.
51-replace-parts_2013.pdf 1 8/11/14 10:36 AM aintenance Maintenance Maintenance Maintenance Maintenan Connectors for 25 mm, 19 mm and 12 mm D.O. Sensors Sensor Connectors The modular design of Broadley-James OxyProbe® sensors affords many configurations. Any sensor can be quickly converted to or from a right angle connector or a straight connector. Both connector designs are useful; choose whichever one works best for the application.
52-membrane_2013.pdf 1 8/11/14 10:37 AM ance Maintenance Maintenance Maintenance Maintenance Maint Membrane Cartridges for 25 mm and 19 mm D.O. Sensors Single Cartridge Kit This kit includes everything required to replace the membrane cartridge and internal o-rings on one 25 mm or 19 mm OxyProbe®.
53-membrane_2013.pdf 1 8/11/14 10:37 AM tenance Maintenance Maintenance Maintenance Maintenance M Membrane Cartridges for 12 mm D.O. Sensors Single Cartridge Kit This kit includes everything required to replace the membrane cartridge and internal o-rings on one 12 mm OxyProbe®. This kit includes: • One 25 ml bottle of electrolyte • One membrane cartridge • One set of internal o-rings Part Number KA1201 C M Y Model D145 D. O.
54-o-rings_2013.pdf 1 8/11/14 10:38 AM ance Maintenance Maintenance Maintenance Maintenance Maint O-rings for D.O. Sensors Internal O-rings for 19 mm and 25 mm D.O. Sensors O-rings need to be replaced over time. Internal o-rings for 19 mm and 25 mm D.O. sensors are included with each membrane kit. However, bulk packs are also available. Part Number AG-9206-10 Description 4 internal o-rings, 1 gasket Quantity 10 sets Size -014 Conical Gasket Metric 14x1.
55-o-rings_2013.pdf 1 8/11/14 10:38 AM tenance Maintenance Maintenance Maintenance Maintenance Ma O-rings for D.O. Sensors Part Number AG-S016-50 AG-S016-25 AG-S016-10 19 mm External O-rings Quantity 50 25 10 This silicone o-ring will fit the external groove of any 19 mm D.O. sensor or housing. It should be replaced regularly to ensure that the housing or sensor fits securely into the port.
56-o-rings_2013.pdf 1 8/11/14 10:39 AM ance Maintenance Maintenance Maintenance Maintenance Maint O-rings for D.O. Sensors and pH Electrodes External O-rings for 12 mm D.O. Sensors and FermProbe® pH Electrodes The Viton o-ring and Teflon washer found on 12 mm D.O. sensors is the same as those found on FermProbes with metric threads. These seals should last the lifetime of the sensor or electrode, but replacements can be purchased in sets of three.
57-o-rings_2013.pdf 1 8/11/14 10:39 AM tenance Maintenance Maintenance Maintenance Maintenance Ma O-rings for 25mm Housings Standard 25 mm Housing O-rings Broadley-James Models 320, 330, 370 housings use the same set of o-rings. O-rings should be inspected regularly and replaced at the first sign of wear.
58-accessories_2013.pdf 1 8/11/14 10:40 AM ories Accessories Accessories Accessories Accessories Accessori Accessories Line-Powered Four-Station D.O. Sensor Polarizer C M Y CM MY CY CMY K pH & D.O. Sensor Simulator for Troubleshooting Instrumentation and Cable Assemblies 58 Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: sales@broadleyjames.
59-accessories_2013.pdf 1 8/11/14 10:41 AM ies Accessories Accessories Accessories Accessories Accessorie Calibration, Diagnostics and Storage Accessories The primary components of a measurement loop are the sensors and transmitters. However, when readings are suspect or if noise and interference are a problem, it can be hard to find the source of the problem without having the proper equipment.
60-storage_2013.pdf 1 8/11/14 10:42 AM ories Accessories Accessories Accessories Accessories Accessor pH and D.O. Storage Storage Containers Benchtop Free Standing Storage Containers These strong storage containers were designed for industrial applications requiring an easily accessible, short-term, remote storage location for pH electrodes during tank maintenance to prevent the electrodes from dehydrating. Free standing storage containers for benchtop use.
61-storage_2013.pdf 1 8/11/14 10:42 AM ries Accessories Accessories Accessories Accessories Accessorie pH Accessories Buffer Solution Precision reference buffers of pH values 4, 7 and 10 are available in 500 ml size bottles. Certificates of Analysis will be included with each bottle. The pH temperature chart is on the label.
62-retainer-rings_2013.pdf 1 8/11/14 10:43 AM ories Accessories Accessories Accessories Accessories Accessori Retainer Rings for pH & D.O. Sensors & Housings Old style 25 mm 0.70” New style 25 mm 0.87” Retainer Ring for 25 mm Port All port retainer rings from Broadley-James Corporation are 316L stainless steel. Housings and D.O. sensors come with an attached retainer ring, however, the ring may need to be replaced due to loss or damage.
63-retainer-rings_2013.pdf 1 8/11/14 10:43 AM ies Accessories Accessories Accessories Accessories Accessorie Accessories for All D.O. Sensors Membrane Cartridge Test Kit Although the membrane is reinforced with stainless steel mesh, it is easy to damage the surface. A slight impact on a hard surface can damage the membrane and affect sensor performance. If cartridges are to withstand multiple cycles, it is critical to confirm that the membrane has not been compromised from the prior run.
64-ports-plugs_2013.pdf 1 8/11/14 10:44 AM ories Accessories Accessories Accessories Accessories Accessori Ports and Plugs 25 mm Port Plugs There are three styles of plugs available from Broadley-James Corporation for straight threaded ports. All are designed to accommodate 25 mm ports and are made from 316L stainless steel. The primary difference in each design is the placement of the o-rings.
65-ports-plugs_2013.pdf 1 8/11/14 10:44 AM ies Accessories Accessories Accessories Accessories Accessorie & TIPS HINTS Ports & Plugs Although the 25 mm threaded port is a standard within the biotech industry, the term "standard port" is no guarantee that two ports will be exactly the same. The overall length of a 25 mm port may vary from tank to tank. This variation is often due to the wall thickness of the tank and the manufacturer’s specifications.
66-simulator_2013.pdf 1 8/11/14 10:45 AM ories Electronic Accessories Electronic Accessories Electronic Acc Calibration Accessories for All D.O. Sensors D.O. Signal Simulator The simulator isolates the transmitter by mimicking the load of a D.O. sensor. In doing so, the simulator can help confirm whether fluctuations in the display are caused by the sensor or by EMF interferences. A two position switch allows simulation of either 0% or 100% saturation. D.O.
67-simulator_2013.pdf 1 8/11/14 10:46 AM cessories Electronic Accessories Electronic Accessories Electron pH & D.O. Sensor Simulator Three Protected Inputs NEW, REDESIGNED SIMULATOR WITH DIGITAL DISPLAY D.O. Solution pH Ground A TROUBLESHOOTING DEVICE for both pH and D.O.
68-cables-section-intro_2013.pdf 1 8/11/14 10:46 AM ables Cables Cables Cables Cables Cables Cables Cables Cables C Cables C M Y CM MY CY CMY K 68 Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: sales@broadleyjames.
69-cables-section-intro_2013.pdf 1 8/11/14 10:47 AM Cables Cables Cables Cables Cables Cables Cables Cables Cables New & Improved Cable & Connector Designs Improved Stainless Steel pH Connectors Broadley-James offers both types of industry standard connectors, the “S8” and the “K9”, which have been used for decades with proven performance in fermentation applications.
70-hp-cables_2013.pdf 1 8/11/14 10:48 AM ables Cables Cables Cables Cables Cables Cables Cables Cables C New & Improved pH Cable Assemblies for T-Pull and S8 Metric Caps Stock Cable Assemblies for All F-615 and F-635 FermProbe® pH Electrodes The BioProcess Technologies® Catalog offers a wide range of cable assemblies to connect FermProbe pH electrodes with all of today’s pH transmitters and benchtop controllers.
71-hp-cables_2013.
72-k9-cables_2013.pdf 1 8/11/14 10:49 AM ables Cables Cables Cables Cables Cables Cables Cables Cables C New & Improved pH Cable Assemblies for K9 Metric Caps Stock Cable Assemblies for All F-695 FermProbe® pH Electrodes The BioProcess Technologies® Catalog offers a wide range of cable assemblies to connect FermProbe pH electrodes with all of today’s pH transmitters and benchtop controllers. • Cables with the KP electrode plug fit on all brands of pH electrodes that use the K9 cap.
73-k9-cables_2013.
74-do-cables_2013.pdf 1 8/11/14 10:50 AM ables Cables Cables Cables Cables Cables Cables Cables Cables C Cable Assemblies for Dissolved Oxygen Sensors Stock Cable Assemblies for All OxyProbe® Sensors The BioProcess Technologies® Catalog offers a variety of cable assemblies to connect OxyProbe D.O. sensors with today’s D.O. transmitters and controllers.
75-do-cables_2013.pdf 1 8/11/14 10:50 AM Cables Cables Cables Cables Cables Cables Cables Cables Cables o r d e r i n g Cable Part Number i n f o r m a t i o n & Connector A Cable Type Cable Length Connector B TIPS D4 Sensor Plug to Lemo 6 Connector • Connects to B.
76-advert.
77-support.pdf 1 8/11/14 10:52 AM ort Support Support Support Support Support Support Support S Global Support C M Y CM MY Technical Website Start-up Assistance On-Site Product Training Extensive Product Literature Comprehensive Documentation Direct Offices Distribution CY CMY K If you don’t see what you’re looking for in this catalog … We have Over 2000 Items Broadley-James makes and stocks thousands of items that are not shown in this catalog.
78_page 2013.
79_page 2013.
Manufacturers of Sensors, and Process Control Automation A broad range of products for the biotech industry including: pH and D.O. sensor simulator for instrument diagnostics BioProcess ® Technologies Catalog of Supplies See page 67 pH Electrodes Dissolved Oxygen Sensors Redox Electrodes Stainless Steel Housings See page 34 Sensor Rebuild Service Cable Assemblies O-rings Solutions See page 4 Simulators Accessories Toll Free: 800-288-2833 Tel: 949.829-5555 Fax: 949.
