Specifications

12
T-Pull
®
pH FermProbe
®
— Style 1
Model
F-615
pH FermProbe
with T-Pull cap
The T-Pull style FermProbe pH electrodes are designed to
be used in bioprocess applications where CIP/SIP proce-
dures are used. Built to withstand repeated steam steriliza-
tion cycles, the FermProbe quickly stabilizes after steam
exposure to be back on-line in half the time of other elec-
trodes. This rugged, low impedance, process pH electrode
continues to provide fast and precise pH measurements
even after harsh use and prolo
nged steam exposure.
The FermProbe design specifies that the pH elec trode be
sec ured to the housing by a free-spinning threaded
retainer nut. This allows the electrode to be installed or
removed from the housing without twisting or discon-
necting the electrode cable.
FermProbe pH Electrodes
with T-Pull Cap
The T-Pull cap eases installation and removal of the electrode
from the housing and greatly reduces fatigue of the extension
cable. The electrode can easily be remov
ed from the housing
without
rotating the electrode or twisting the cable, further
reducing cable fatigue.
Features:
• Rugged T-Pull cap design eases removal of electrode
from housing. No tools required.
• Greatly reduces cable fatigue.
• Electrode retainer nut is part of the handle. Cannot be
lost or misplaced.
• Available with integral cable.
FermProbe pH electrodes
are available in various
lengths to accommodate
particular applications
and housings.
FermProbe pH Electrode Specifications:
• 0–14 pH range
• Steam sterilizable to 135° C
• 150 psig maximum pressure
• Double junction, Ag-AgCl reference system
• Electrode secures to housing with threaded
retainer nut
• S8 disconnect connector in T-Pull cap
160 mm
length
210 mm
length
130 mm
length
CLASS
A
CLASS
B
CLASS
C
odes pH Electrodes pH Electrodes pH Electrodes pH Electrodes pH
130 mm
length
Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: [e-mail]
C
M
Y
CM
MY
CY
CMY
K
12-T-pull_2013.pdf 1 8/18/14 11:09 AM