Specifications

28
Housings with Sanitary Flanges
o r d e r i n g i n f o r m a t i o n
CLASS
A
CLASS
A
Housings for SanitaryTees and Novasaptic Side Ports
Model 357
Unguarded,
for 1
1
/2"
Sanitary Tee
Model 367
Guarded,
for 1
1
/2"
Sanitary Tee
sings pH Housings pH Housings pH Housings pH Housings pH Hou
Flanged Housings for
Sanitary Pipe Systems
Commonly used in both the food and phar-
maceutical industries, the 350 series and 360
series housings are suitable for sanitary pipe
systems with CIP requirements. These hous-
ings are most often found in downstream
processes such as purification.
These housings are secured into a sanitary
pipe tee with a standard flange clamp sealed
with a flange gasket. The pH electrode is then
inserted into the housing for on-line meas-
urements. When using a standard sanitary
tee, the
sensor will be positioned such that
the tip of the sensor is in the middle of the
process flow. T-Pull
®
FermProbes
®
are com-
patible with these housings.
These housing are also compatible with
Novaseptic side ports.
Housing
Class
Typical Used With Used With Housing
Model Insertion Length pH Electrode Model Electrode Length Part Number
Model 357 for 1.5" Sanitary Tee Fitting, Unguarded
357
A
75 mm 3.0" F-615 130 mm 357-61-H075
Model 367 for 1.5" Sanitary Tee Fitting, Guarded
367
A
90 mm 3.6" F-615 130 mm 367-61-H075
Model 350 for 2" Sanitary Tee Fitting, Unguarded (not shown)
350
A
100 mm 3.9" F-615 130 mm 350-61-H090
Model 360 for 2" Sanitary Tee Fitting, Guarded (not shown)
360
A
115 mm 4.5" F-615 130 mm 360-61-H090
Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: [e-mail]
C
M
Y
CM
MY
CY
CMY
K
28-flange_2013.pdf 1 8/11/14 10:20 AM