Specifications

50
Cathode Assembly for 25 mm and 19 mm Sensors
This part number includes the cathode assembly and both o-rings required
to seal it into the sensor body. The only difference between each of the
models listed below is the length of the multi-lead ribbon cable.The ribbon
cable connects the assembly to the sensor’s 4-pin connector.
Part Number Sensor Length
CT25-PT-050MP 70 mm
CT25-PT-130MP 150 mm
CT25-PT-200MP 220 mm
CT25-PT-300MP 320 mm
CT25-PT-400MP 420 mm
Multi-lead
Ribbon Cable
Replacement Parts
for 25 mm and 19 mm D.O. Sensors
Cathode Removal Tool
The two notches in the bottom of this stainless steel tool fit into the grooves
of the cathode retainer nut to quickly remove the nut and the cathode
assembly. The knurled handle provides sufficient grip to tighten the retainer
nut to the proper torque eliminating the need for additional tools.
Cathode
Tool
Part Number
AM-9213
Cathode Retainer Nut
This retainer nut secures the cathode assembly into the sensor body. The
mechanical seals on the Broadley-James electrode keep this retainer nut
clean and dry. It is reusable and unlikely to need replacing unless acci-
dentally lost during rebuild.
Cathode
Retainer
Nut
Part Number
AM-9210
ance Maintenance Maintenance Maintenance Maintenance Ma
Cathode
Assembly
Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: [e-mail]
C
M
Y
CM
MY
CY
CMY
K
50-replace-parts_2013.pdf 1 8/11/14 10:35 AM