Specifications

54
O-rings for D.O. Sensors
Part Number Description Quantity
AG-9206-10 4 internal o-rings, 1 gasket 10 sets
Internal O-rings for 19 mm and 25 mm D.O. Sensors
O-rings need to be replaced over time. Internal o-rings for 19 mm and 25 mm D.O. sensors are included with each mem-
brane kit. However, bulk packs are also available.
&
&
T I P S H I N T S
T I P S H I N T S
O-ring kits
The Broadley-James D.O. o-ring kit contains five o-rings,
but the sensor only has four sealing points. The differ-
ence is at the first sealing point (see above). There is a
bevel at the very end of the inside threads of a Broadley-
James endcap. This bevel creates a pocket into which the
o-ring seats securely. Some manufacturers do not have
such a pocket, therefore, only a very small, thin o-ring will
fit. An extra, thin o-ring is provided to fit these sensors.
Part Number Description Quantity
AG-E011-25 Internal o-rings for 12 mm D.O. 25
Internal O-rings for 12 mm D.O. Sensors
O-rings should be on hand when changing the membrane cartridge of a D.O. sensor. These internal o-rings are included in
membrane cartridge kits. However, membrane cartridge bulk packs do not include o-rings or electrolyte solution. These
items must be purchased separately.
Shown
actual size
12 mm D.O.
Sensor and
Cartridge
O-rings shown
actual size
ance Maintenance Maintenance Maintenance Maintenance Maint
Size
-014
Conical
Gasket
Size
-015
Size -011
EPDM
For
Broadley-James
Sensors
Size
-014
Metric
14x1.0
For other
models
Broadley-James Corporation (U.S. & Canada) Toll-Free: 800-288-2833 E-mail: [e-mail]
C
M
Y
CM
MY
CY
CMY
K
54-o-rings_2013.pdf 1 8/11/14 10:38 AM